Abstract:Mine dust is a prevalent pollutant generated during the mining process, often leading to explosion accidents and causing pneumoconiosis. Foam dust suppression technology has emerged as a promising method for efficient dust control due to its high-efficiency dust collection and ease of use. However, the application of foam in the field has revealed higher concentrations of inorganic salts in the mine dust suppressants, resulting in suboptimal foaming performance. As a result, additional foaming agent and increased concentration are often required to achieve the desired effect, which escalates the cost of mine dust control. To address this issue, this study proposes optimizing the performance of mine dust suppression foam through the incorporation of polymers with excellent salt resistance. In this investigation, foam liquids comprising xanthan gum (XG) and sodium carboxymethyl cellulose (CMC) were tested using FoamScan to evaluate their foaming performance and foam stabilization at various concentrations of inorganic salt. Additionally, the rheological properties of the foam liquids were analyzed by measuring the viscoelastic modulus using an interfacial rheometer. Experimental results demonstrated that the addition of XG and CMC did not compromise the foaming ability of sodium fatty alcohol polyoxyethylene ether sulfate (AES). Moreover, the liquid-carrying capacity of bubbles, in terms of foam stability, was enhanced. Specifically, the foam stabilization remained relatively stable when the XG concentration exceeded 0.5‰, even under different salt concentrations. Interfacial rheological tests revealed that the addition of XG substantially increased the viscoelastic modulus of the foam liquid. Furthermore, the phase angle remained below 45°, indicating the dominant role of the elastic modulus in the foam liquid, resulting in improved bubble resistance to interference and deformation. This experimental study successfully resolved the issue of poor stability in mine dust suppression foam caused by high salt content during the foam preparation process. The findings can significantly contribute to the widespread adoption and application of dust suppression foam technology in mining operations.

Modified sodium alginate-based three-dimensional network hydrogel dust suppressant: Preparation, characterization, and performance

Preparation and performance characterization of a new dust suppressant with a cross-linked network structure for use in open-pit coal mines

Study on synthesis of environmentally-friendly polymer dust suppressant based on graft modification

Multiporous Microstructure for Enhancing the Water Absorption and Swelling Rate in Poly(sodium Acrylic Acid) Superabsorbent Hydrogels Based on a Novel Physical and Chemical Composite Foaming System

Preparation and characterization of modified dual network dust suppression gel based on sodium alginate and soluble starch

Properties and Mechanism Analysis of a Novel Construction Dust Suppressant Based on Polymer Blending

Development of an eco-friendly dust suppressant based on modified pectin: experimental and theoretical investigations

Preparation and performance of starch-based cross-linked network structured dust suppression foams for complex climatic conditions

Experimental Study on Dust Suppression Effect and Performance of New Nano-Composite Dust Suppressant

Wetting-consolidation type dust suppressant based on sugarcane bagasse as an environmental material: Preparation, characterization and dust suppression mechanism

Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect

Study on the combined dust suppression effect of sodium alginate and sodium fatty acid methyl ester sulfonate

A hygroscopic dual-porous road dust suppressant with good dust suppression prepared by the freeze-thawing method

Experimental study on improving salt resistance of dust suppressing foam with polymers

Preparation and performance evaluation of modified soy protein isolate polymeric dust suppressant using graft copolymerization

Optimal Preparation and Performance Study of Eco-Friendly Composite Chemical Dust Suppressants: A Case Study in a Construction Site in Chengdu

Carboxymethyl cellulose sodium gel: A modified material used to suppress coal dust pollution

Synthesis of a new three-dimensional cross-linked network dust suppressant and its mechanism of coal-dust inhibition

Preparation and performance analysis of a coking coal dust suppressant spray

Efficient removal of atmospheric dust by a suppressant made of potato starch, polyacrylic acid and gelatin

Synthesis and properties of coal dust suppressant based on microalgae oil extraction