Oxidative esterification of renewable furfural on cobalt dispersed on ordered porous nitrogen-doped carbon

Defeng Yin,Yanxia Zheng,Lixi Yang,Shuyue Li,Daqing Zhu,Yafei Guo,Cuncun Zuo,Yuchao Li,Haofei Huang,Ming Wang

DOI: https://doi.org/10.1039/d0ra09945g

IF: 4.036

2021-01-01

RSC Advances

Abstract:Catalytic oxidative esterification of furfural to methyl 2-furoate with cobalt-dispersed N-doped ordered porous carbon.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Construction of N, O Co-Doped Carbon Anchored with Co Nanoparticles As Efficient Catalyst for Furfural Hydrodeoxygenation in Ethanol

Hui Yang,Hao Chen,Wenhua Zhou,Haoan Fan,Chao Chen,Yixuan Sun,Jiaji Zhang,Sifan Wang,Teng Guo,Jie Fu

DOI: https://doi.org/10.1016/j.jechem.2022.11.037

IF: 13.1

2023-01-01

Journal of Energy Chemistry

Abstract:Hydrodeoxygenation of furfural(FF)into 2-methylfuran(MF)is a significant biomass utilization route.However,designing efficient and stable non-noble metal catalyst is still a huge challenge.Herein,we reported the N,O co-doped carbon anchored with Co nanoparticles(Co-SFB)synthesized by employing the organic ligands with the target heteroatoms.Raman,electron paramagnetic resonance(EPR),electro-chemical impedance spectroscopy(EIS),and X-ray photoelectron spectroscopy(XPS)characterizations showed that the co-doping of N and O heteroatoms in the carbon support endows Co-SFB with enriched lone pair electrons,fast electron transfer ability,and strong metal-support interaction.These electronic properties resulted in strong FF adsorption as well as lower apparent reaction activation energy.At last,the obtained N,O co-doped Co/C catalyst showed excellent catalytic activity(nearly 100 mol％FF conver-sion and 94.6 mol％MF yield)and stability for in-situ dehydrogenation of FF into MF.This N,O co-doping strategy for the synthesis of highly efficient catalytic materials with controllable electronic state will pro-vide an excellent opportunity to better understand the structure-function relationship.
Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Ling Xu,Renfeng Nie,Xilei Lyu,Juncheng Wang,Xiuyang Lu

DOI: https://doi.org/10.1016/j.fuproc.2019.106205

IF: 8.129

2019-01-01

Fuel Processing Technology

Abstract:Non-noble metal catalyzed transfer hydrogenation of biomass using biomass-derived formic acid (FA) as hydrogen source is one of promising strategies for relieving fossil energy crisis. Since acidic FA would destroy and deactivate naked active sites, developing heterogeneous catalysts with stabilized structure and activity that are qualified in harsh conditions is highly desirable but challenging. Herein, mesoporous N-doped carbon encapsulated Co catalysts (Co-N-C) are synthesized through a facile carbonization of Co(phen)(2)(OAc)(2) with nano-MgO as porogen agent. After acid treatment, the optimized Co-N-C-700 (pyrolyzed at 700 degrees C) could afford full furfural (FAL) conversion as well as > 99% furfuryl alcohol (FOL) selectivity with only 3.5 equiv. FA at 150 degrees C for 6 h, exhibiting much superior performance than commercial Pd-, Pt- and Ru-based catalysts. Using molecular H-2 as hydrogen source not only affords low conversion but also leads to over-hydrogenation of FOL and generation of furfuryl formate (FF). This catalyst is very stable in acidic FA and could be recycled 5 times without deactivation or leaching. Co-N-C-700 is also capable for gram-scale transfer hydrogenation of FAL and is versatile for other aldehydes with > 90% yield of desired products. This work could promote the application of encapsulated Co-based catalysts for selective transformation of biomass in chemical industry.
Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Ling Xu,Renfeng Nie,Xujie Chen,Yanchen Li,Yuxi Jiang,Xiuyang Lu

DOI: https://doi.org/10.1039/d0cy01969k

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:Catalytic transfer hydrogenation (CTH) reaction is considered as a potential route for upgrading bio-based carbonyl compounds to their corresponding alcohols. Herein, ordered mesoporous N-doped carbon confined Co-N-x (Co-NC) was adopted as a catalyst for converting cellulose-derived 5-hydroxymethylfurfural (HMF) to 2,5-furandimethanol (FDM) using formic acid (FA) as a hydrogen donor. Different catalysts and preparation methods were screened, by varying cobalt phases and template removal procedures. It is found that highly dispersed N-confined Co species (Co-N-x) other than naked Co NPs acted as catalytic species for the CTH of HMF with FA, which gave 86% yield of FDM at 100% HMF conversion. Kinetic experiments revealed that, compared with molecular hydrogen, Co-NC could effectively accelerate HMF hydrogenation and suppress as-formed FDM hydrogenolysis in the presence of FA, which is ascribed to its superior activity toward hydrogen transfer from FA and fast desorption toward FDM. Mechanism studies indicated that C-H dissociation of FA could be the rate-determining step in the CTH reaction, and the hydrogenation of HMF could proceed through an intermolecular hydride transfer route. This work shows that the bifunctional nature of the catalyst is critical in the efficient CTH of biomass-derived carbonyl compounds and provides insights toward the rational design of such catalysts.
Temporal Trends and Variation in Bronchoscopy Use for Acute Respiratory Failure in the United States

Hui Yang,Hao Chen,Wenhua Zhou,Haoan Fan,Chao Chen,Yixuan Sun,Jiaji Zhang,Sifan Wang,Teng Guo,Jie Fu

DOI: https://doi.org/10.1016/j.jechem.2022.11.037

IF: 13.1

2023-01-01

Journal of Energy Chemistry

Abstract:Hydrodeoxygenation of furfural (FF) into 2-methylfuran (MF) is a significant biomass utilization route. However, designing efficient and stable non-noble metal catalyst is still a huge challenge. Herein, we reported the N, O co-doped carbon anchored with Co nanoparticles (Co-SFB) synthesized by employing the organic ligands with the target heteroatoms. Raman, electron paramagnetic resonance (EPR), electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS) characterizations showed that the co-doping of N and O heteroatoms in the carbon support endows Co-SFB with enriched lone pair electrons, fast electron transfer ability, and strong metal-support interaction. These electronic properties resulted in strong FF adsorption as well as lower apparent reaction activation energy. At last, the obtained N, O co-doped Co/C catalyst showed excellent catalytic activity (nearly 100 mol% FF conversion and 94.6 mol% MF yield) and stability for in-situ dehydrogenation of FF into MF. This N, O co-doping strategy for the synthesis of highly efficient catalytic materials with controllable electronic state will provide an excellent opportunity to better understand the structure-function relationship. (c) 2022 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Effective oxidative esterification of 5–hydroxymethylfurfural over a N-doped biomass-based carbon supported cobalt catalyst

Linhao Yu,Hong Chen,Yingying Li,Zhe Wen,Yongdan Li

DOI: https://doi.org/10.1016/j.cattod.2022.09.018

IF: 5.3

2022-10-01

Catalysis Today

Abstract:The metallic cobalt supported on nitrogen dopped carbon material was employed as an efficient catalyst in the oxidative esterification of 5-hydroxymethylfurfural (HMF) to furan-2,5-dimethylcarboxylate (FDMC). The carbonization temperature has a significant effect on the morphology and structure of Co/N-C samples. The Co/N-C calcined at 900 o C exhibits the best catalytic performance and a 73.8% FDMC yield at 91.7% HMF conversion is measured at 130 o C for 20 h with K 2 CO 3 under 1 MPa O 2 . The catalytic activity of Co/N-C was benefited by the synergistic effect between the metallic cobalt and nitrogen-doped carbon material. The reaction mechanism of FDMC formation was proposed.

chemistry, physical,engineering, chemical, applied
N-Doped carbon nanotube encapsulated cobalt for efficient oxidative esterification of 5-hydroxymethylfurfural

Linhao Yu,Saravanan Kasipandi,Hong Chen,Yingying Li,Xueli Ma,Zhe Wen,Yongdan Li

DOI: https://doi.org/10.1039/d1re00542a

2022-01-01

Abstract:A N-doped carbon nanotube encapsulated cobalt catalyst was prepared for oxidative esterification of 5-HMF to furan-2,5-dimethylcarboxylate, a promising precursor for polymers.

chemistry, multidisciplinary,engineering, chemical
Selective aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over nanojunctions of cobalt–ceria binary oxide in water

Aicheng Chen,Tingting Li,Qian Zhang,Hu Zhu

DOI: https://doi.org/10.1039/d2cy00110a

2022-01-01

Abstract:Non-precious cobalt–ceria binary oxide nanojunctions with rich interfaces were designed to efficiently catalyze 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA).

chemistry, physical
Aerobic Oxidation of Hydroxymethylfurfural and Furfural by Using Heterogeneous Cox Oy -N@C Catalysts.

Jin Deng,Hai-Jie Song,Min-Shu Cui,Yi-Ping Du,Yao Fu

DOI: https://doi.org/10.1002/cssc.201402843

IF: 8.4

2014-01-01

ChemSusChem

Abstract:2,5-Furandicarboxylic acid (FDCA) is considered to be a promising replacement for terephthalic acid since they share similar structures and properties. In contrast to FDCA, 2,5-furandicarboxylic acid methyl (FDCAM) has properties that allow it to be easily purified. In this work, we reported an oxidative esterification of 5-hydroxymethylfurfural (HMF) and furfural to prepare corresponding esters over Cox Oy -N@C catalysts using O2 as benign oxidant. High yield and selectivity of FDCAM and methyl 2-furoate were obtained under optimized conditions. Factors which influenced the product distribution were examined thoroughly. The Cox Oy -N@C catalysts were recycled five times and no significant loss of activity was detected. Characterization of the catalysts could explain such phenomena. Using XPS and TGA, we made a thorough investigation of the effects of ligand and pyrolysis temperature on catalyst activity.
Hydrodeoxygenation of furfural to 2-methylfuran over Cu-Co confined by hollow carbon cage catalyst enhanced by optimized charge transfer and alloy structure

Shuangxin Dou,Liguo Ma,Yingying Dong,Qingqing Zhu,Xiangjin Kong

DOI: https://doi.org/10.1016/j.jcis.2024.02.157

IF: 9.9

2024-02-27

Journal of Colloid and Interface Science

Abstract:Hydrodeoxygenation of furfural over non-noble metal catalyst is an effective route to synthesis 2-methylfuran, but the reaction is often hampered by the low activity and selectivity of the catalyst. Herein, a bimetallic catalyst with CuCo alloy encapsulated in a hollow nitrogen-doped carbon cages (CuCo/NC) are fabricated by using ZIF-67 as a sacrificial template, which exhibited superior catalytic performance and a full conversion of furfural with a 95.7 % selectivity towards 2-methylfuran was achieved at an under relatively mild reaction conditions (150 °C, 1.5 MPa H 2 and 4.0 h). The characterizations and density functional theory calculations clearly evidenced that the introduced Cu species acts as a switch to regulate the activity and selectivity of the catalyst via two aspects. On the one hand, the Cu species perturb the Co electronic structure leading to adsorption configuration of furfural change from flat to vertical on the catalyst surface, which successfully hindered the hydrogenation of furan ring, resulting high selectivity towards 2-methylfuran. On the other hand, the formed CuCo (1 1 1) sites promotes the dissociation of hydrogen, cleavage of the CO bond and reduces the diffusion barrier of hydrogen so as to advance the formation of 2-methylfuran. This work may provide a feasible strategy for the design of nanoalloy catalyst for the hydrodeoxygenation of biomass platforms to value-added chemicals.

chemistry, physical
Cobalt Boride/g-C3N4 Nanosheets-Assisted Electrocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

Mohammed A. Suliman,Chanbasha Basheer,Wasif Farooq

DOI: https://doi.org/10.3390/catal11101241

IF: 3.9

2021-10-15

Catalysts

Abstract:The electrochemical production of 2,5-furandicarboxylic acid (FDCA) from 5-(hydroxymethyl)furfural (HMF) is receiving growing attention. The FDCA-based polyethylene 2,5-furan dicarboxylate (PEF) polymer is a green candidate for substituting polyethylene terephthalate. This work demonstrated a highly efficient CoB/g-C3N4 nanosheet on the surface of the nickel foam as an electrode for the HMF electrooxidation reaction. Electrolysis at a constant potential combined with liquid chromatography showed the formation of FDCA with a yield of 97% with an excellent faradaic efficiency of near 95%. CoB/g-C3N4 achieved a current density of 20 mA cm−2 for HMF oxidation in 1.0 M KOH with 10 mM HMF at 1.37 V vs. RHE before the competing oxygen evolution reaction. The electrocatalyst was effectively reused up to three times without compromising efficiency. This work demonstrates a cheap and active electrocatalyst material for the electrochemical formation of FDCA from HMF and gives perception into the reaction mechanism.

chemistry, physical
A high-performance porous carbon coated Co x P dual functional catalyst for upgrading of furfuryl alcohol

Xin Luo,Shuyi Su,Qingbin Zeng,Hongliang Peng,Xu Yang

DOI: https://doi.org/10.1016/j.apsusc.2024.161290

IF: 6.7

2024-09-26

Applied Surface Science

Abstract:Cobalt phosphides exhibit dual catalytic characteristics as both metal and acid, rendering them widely employed in the organic chemicals refining. Yet, their utilization in the hydrodeoxygenation of furanic molecules derived from biomass remains underexplored. In this study, we fabricated a porous carbon coated cobalt phosphide catalysts (Co x P@C) by pyrolysis and gas-phosphidation of Co-MOFs, and systemically elucidated the synergistic effect of Co-P on hydrodeoxygenation of furfuryl alcohol to produce 2-methyl furan. Phosphidation generated a substantial quantity of positively-charged Co δ+ species through Co-P bonding, and the intensified charge-transfer from cobalt to phosphorous caused the Co δ+ species more electro-deficiency, and enhanced both hydrogen dissociation centers and acid sites when the P/Co molar ratio reached 1.2, thereby synergically boosting hydrodeoxygenation performance. The optimized Co x P@C achieved a 90 % yield of 2-methyl furan under mild conditions (140 °C and 2.5 MPa), while also demonstrating robust recyclability. This study underscores the potential benefits of cobalt phosphide catalyst for the hydrogenative upgrading of biomass-derived molecules.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Facile Hydrogenation of Furfural by MOF-Derived Graphitic Carbon Wrapped FeCo Bimetallic Catalysts

M Nasiruzzaman Shaikh,Muhammad Ali,Mahmoud M Abdelnaby,Abbas S Hakeem,Mohammed Sanhoob,Huda S Alghamdi,Afnan M Ajeebi,Md Abdul Aziz

DOI: https://doi.org/10.1002/asia.202201254

2023-06-01

Abstract:A catalytic system for selective transformation of furfural into biofuel is highly desirable. However, selective hydrogenation of the C=O group over the furan ring of furfural to produce ether in one step is challenging. Here, we report the preparation of a series of magnetically recoverable FeCo@GC nano-alloys (37-40 nm). Fe3 O4 (3-5 nm) and MOF-71 (Co), used as the Co and C source, were mixed together in a range of Fe/Co ratios, and then encapsulated in a graphitic carbon (GC) shell to prepare such alloys. STEM-HAADF shows the darker core made of FeCo and the shell of graphitic carbon. Furfural is hydrogenated to produce >99% isopropyl furfuryl ether in isopropanol with >99% conversion at 170 °C under 40 bars of H2 , whereas n-chain alcohol, such as ethanol, produces corresponding ethyl levulinate in 93%. The synergistic effect due to the charge transfer from Fe to Co leads to higher reactivity of FeCo@GC. The catalyst, which can be separated from the reaction medium using a simple magnet without significant damage to the surface or composition, retained its reactivity and selectivity for up to four consecutive cycles.
Efficient one-pot transformation of furfural to pentanediol over Cu-modified cobalt-based catalysts

Feng Wang,Kangyu Zhao,Qiong Xu,Dulin Yin,Xianxiang Liu

DOI: https://doi.org/10.1016/j.biortech.2024.130858

Abstract:Pentanediols are substances with significant market potential as the key monomers for advanced polymeric materials. In this study, we successfully achieved directly hydrogenolysis of biomass-based furfural to 1,5-pentanediol with a remarkable yield of 53.4 % using Cu-modified cobalt supported on cerium dioxide catalysts. Through comprehensive characterization techniques, including H2-TPR, NH3-TPD, XPS, EPR and Raman analysis, the study revealed that the introduction of Cu altered the dispersion of Co species, attenuated the interaction between Co species and cerium dioxide, enhanced its reduction extent, and fostered the formation of plentiful cobalt oxide species and oxygen vacancies on the catalyst's surface. The cooperative influence of Cu and Co heightened the selectivity of the hydrogenolysis reaction. This work provides a novel strategy for the development of greener and more efficient catalytic processes based on non-precious metals that for the selective conversion of biomass-derived furfural to high-value pentanediols.
A highly accessible and robust carbon-coated cobalt nanoparticle catalyst for furfural hydrogenative valorization at mild reaction

Wu Liu,Jieying Hua,Shuyi Su,Xu Yang

DOI: https://doi.org/10.1016/j.mcat.2023.113647

IF: 4.6

2023-10-29

Molecular Catalysis

Abstract:The hydrogenative upgrading of furfural into valuable chemical intermediates has currently caught intensive research interest, with robust and efficient catalysts that can operate under mild reaction conditions remaining challenging. In this study, we presented a high-performance carbon-coated cobalt catalyst (Co@C) through pyrolysis of sheet-like Co-MOF. The optimized Co@C-T550 exhibited an intriguing furfural conversion rate under a very mild reaction condition of 80 °C and 1 MPa. The catalyst's enhanced activity at low-temperature effectively suppressed side reactions, resulting in an excellent furfuryl alcohol productivity of 4.8 g FOL ·g Co −1 ·h −1 , surpassing most cobalt-based catalysts reported in recent literature. Furthermore, the high performance of Co@C-T550 can be sustained with slight decay even after undergoing 10 recycling runs, underscoring the reliable stability of the catalyst. Structure characterizations have revealed that this novel Co@C-T550 had highly dispersed cobalt nanoparticles with a microporous carbon coating, affording a high number of metallic cobalt sites with an excellent ability to resist cobalt sintering/leaching and re-oxidation. The insights gained from this study provide a solid foundation for the rational design of advanced carbon-coated cobalt catalysts for low-temperature hydrogenative biomass upgrading.

chemistry, physical
Efficient Cu/FeOx catalyst with developed structure for catalytic transfer hydrogenation of furfural

Jingjie Luo,Yuan Cheng,Hongyu Niu,Tao Wang,Changhai Liang

DOI: https://doi.org/10.1016/j.jcat.2022.07.013

IF: 7.3

2022-09-01

Journal of Catalysis

Abstract:Design of efficient and easy-recycling copper catalysts for furfural hydrogenation provides alternative approaches for high-value added chemicals and fuel. In this work, the catalytic transfer hydrogenation of furfural was catalyzed by magnetic Cu/FeOx catalysts via sol–gel method to produce 2-methylfuran with high yield. Homogeneous Cu-Fe-Ox composition could be constructed in the calcined precursor. The growth and evolution of metal centers were modulated and monitored during thermal treatments. The synergy between CuO and FeOx rationally affected the reducibility of the catalyst precursors. After the deliberate two-step-thermal activation, CuO was readily reduced and extruded from FeOx host matrix via phase segregation to give fine Cu particles fastened by FeOx supporting layers. Both experiments and simulation explicitly confirmed the facile isopropanol dehydrogenation to donate hydrogen via small Cu clusters. The dehydroxylation pathway was preferentially happened on furfuryl alcohol with lower activation energy.

chemistry, physical,engineering, chemical
Room-temperature fabrication of defective CoOxHy nanosheets with abundant oxygen vacancies and high porosity as efficient 5-hydroxymethylfurfural oxidation electrocatalysts

Ruyi Zhong,Puwei Wu,Qi Wang,Lei Du,Yunhua Liu,Huakang Yang,Meng Gu,Z. Conrad Zhang,Limin Huang,Siyu Ye,Xi-Ting Zhang

DOI: https://doi.org/10.1039/d3gc00588g

IF: 9.8

2023-04-19

Green Chemistry

Abstract:Cobalt oxides/hydroxides have attracted increasing attention in the electrocatalytic oxidation reaction of 5-hydroxymethylfufural (HMFOR) at ambient conditions for 2,5-furandicarboxylic acid (FDCA) production recently, but the understanding of the interplay of...

chemistry, multidisciplinary,green & sustainable science & technology
Insight into the catalytic mechanism of N-doped carbon nanotubes supported CoNi bimetallic catalyst boosts the base-free oxidative esterification of furfural

Xin Yu,Xiaoyi Huang,Wenlong Jia,Jiahong Chen,Shibo Yang,Lincai Peng,Yong Sun,Xing Tang,Xianhai Zeng,Shuliang Yang,Zheng Li,Feng Xu,Lu Lin

DOI: https://doi.org/10.1016/j.mcat.2023.113197

IF: 4.6

2023-05-21

Molecular Catalysis

Abstract:Developing active and affordable catalysts for the transformation of biomass platform into value-added chemicals have drawn tremendous attention. Herein, we have successfully prepared a CoNi bimetallic nitrogen-doped carbon nanotubes (CNTs) catalyst, manifesting outstanding catalytic performance for furfural oxidative esterification under base-free conditions (methyl furoate yield >99%), and great recyclability (5th recycle). Importantly, an impressive methyl furoate formation rate of around 1980 μmol methyl furoate ·g cat −1 ·h −1 was achieved, to the best of our knowledge, the result represents one of the highest methyl furoate formation rates. The results revealed that the doping of Ni into the Co x Ni y -CNTs catalyst brings about more active sites. Fourier transforms infrared spectrometer results suggest that the Ni-N x sites are responsible for the adsorption of the substrate with tilted or vertical adsorption. Furthermore, the introduction of Ni facilitates the improvement of basicity, which in turn promotes the β-hydride elimination. All of these active sites boost the overall activity of the catalyst for the oxidative esterification of furfural.

chemistry, physical
Co@NC Chainmail Nanowires for Thermo‐ and Electrocatalytic Oxidation of 2,5‐Bis(hydroxymethyl)furan to 2,5‐Furandicarboxylic Acid

Bin Zhu,Qiuge Wang,Jinggang Wang,Xiao Yu,Jian Zhang,Chunlin Chen

DOI: https://doi.org/10.1002/cssc.202401422

IF: 8.4

2024-09-23

ChemSusChem

Abstract:2,5‐Furandicarboxylic acid (FDCA) has emerged as an important bio‐based furanic compound, which has broad application prospects in renewable energy and materials, especially in the preparation of polyethylene 2,5‐furandicarboxylate (PEF). While the conventional synthesis of FDCA involves oxidation of 5‐hydroxymethylfurfural (HMF) as a substitute, the thermal and chemical instability of HMF due to its aldehyde group poses challenges. A more favorable alternative is the utilization of 2,5‐bis(hydroxymethyl)furan (BHMF), a non‐aldehyde and more stable precursor. This study pioneeringly reports nitrogen‐doped‐carbon encapsulated cobalt (Co@NC) chainmail nanowires for the thermal and electrocatalytic oxidation of BHMF to FDCA. The Co@NC/NF achieved a 97.9% conversion of BHMF with a 93.3% yield of FDCA at 1.475 V vs. RHE, whereas thermal catalysis only obtained 14.9% FDCA yield after 10 hours. Kinetic studies indicated that the large electrochemically active surface area and excellent kinetic parameters contribute its superior electrochemical performance. Mechanistic analysis revealed that the migration of inner electrons to the exterior modified the electronic properties of the carbon layer, thereby facilitating the oxidation of BHMF. Furthermore, the in‐situ generation of high‐valent cobalt species markedly accelerated the BHMF oxidation. This research underscores the potential of carbon‐encapsulated metal chainmail catalysts in thermal and electrochemical biomass conversion.

chemistry, multidisciplinary,green & sustainable science & technology
Efficient electrochemical oxidation of the biomass platform compound furfural on a Ni0.48Co0.36O0.16 electrode

Yanru Zhang,Xinyue Wang,Pengpeng Wu,Xiliang Zhang,Qian Zhou,Liang Xing,Yongming Fan

DOI: https://doi.org/10.1007/s10800-024-02122-y

IF: 2.925

2024-05-16

Journal of Applied Electrochemistry

Abstract:The use of electrocatalytic technology to replace traditional harsh thermocatalysis in the process of biomass utilization has undoubtedly been an effective means to achieve green and sustainable development. The use of the environmentally friendly method of synthesizing furoic acid (FA) from the biomass platform compound furfural (FF) by electrooxidation was investigated. The surface of the Ni–Co oxide electrode with a Ni content of 0.48 (Ni 0.48 Co 0.36 O 0.16 ) obtained by a simple electrodeposition method was covered by a layer of flower-like porous structure, while NiO, Co 2+ , and Co 3+ coexisted. Moreover, the Ni 0.48 Co 0.36 O 0.16 electrode exhibited 95.4% FA faraday efficiency and 99.6% selectivity with a substrate concentration of 20 mM at 1.0 V vs. Hg/HgO and 50 °C. In addition, a mechanism for electrooxidation of FF into FA over a Ni–Co oxide electrode was proposed.

electrochemistry
Co- and V 2 O 3 -Modified Ni-Based Nanocatalyst for 5-Hydroxymethylfurfural Electrooxidation

Rong Chen,Jia Wu,Yumei Zhu,Xizi Wu,Zhili Li,Shibin Yin

DOI: https://doi.org/10.1021/acsanm.4c00277

IF: 6.14

2024-03-28

ACS Applied Nano Materials

Abstract:The electrooxidation of 5-hydroxymethylfurfural (HMF) provides a prospective method to produce high-value 2,5-furandicarboxylic acid (FDCA). Since this multistep process includes the oxidation of aldehyde and hydroxyl groups, a deep understanding of the mechanism of HMF oxidation reaction (HMFOR) is crucial. Herein, the surface reconstruction of the nickel-based catalyst is regulated by Co and V2O3 modifications to reveal the relationship between the reconstructed surface and the HMFOR performance. The introduction of the V2O3 nanosheet facilitates the in situ reconstruction of the nickel-based nanocatalyst by enhancing the adsorption of OH*. The incorporation of Co adjusts the electronic structure of nickel, contributing to a decrease in the formation potential of NiOOH. Moreover, the insitugenerated NiOOH promotes the adsorption and activation of aldehyde and hydroxyl groups, providing beneficial effects for HMFOR. Impressively, Co–Ni/V2O3/NF needs only 1.29 VRHE to achieve 10 mA cm–2 for HMFOR and maintains high FDCA selectivity for 10 cycles. This work explains the regulations of V2O3 and Co on NiOOH species formation, which is conducive to designing an efficient nickel-based catalyst for HMF oxidation.

materials science, multidisciplinary,nanoscience & nanotechnology

Oxidative esterification of renewable furfural on cobalt dispersed on ordered porous nitrogen-doped carbon

Construction of N, O Co-Doped Carbon Anchored with Co Nanoparticles As Efficient Catalyst for Furfural Hydrodeoxygenation in Ethanol

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Temporal Trends and Variation in Bronchoscopy Use for Acute Respiratory Failure in the United States

Effective oxidative esterification of 5–hydroxymethylfurfural over a N-doped biomass-based carbon supported cobalt catalyst

N-Doped carbon nanotube encapsulated cobalt for efficient oxidative esterification of 5-hydroxymethylfurfural

Selective aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over nanojunctions of cobalt–ceria binary oxide in water

Aerobic Oxidation of Hydroxymethylfurfural and Furfural by Using Heterogeneous Cox Oy -N@C Catalysts.

Hydrodeoxygenation of furfural to 2-methylfuran over Cu-Co confined by hollow carbon cage catalyst enhanced by optimized charge transfer and alloy structure

Cobalt Boride/g-C3N4 Nanosheets-Assisted Electrocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

A high-performance porous carbon coated Co x P dual functional catalyst for upgrading of furfuryl alcohol

Facile Hydrogenation of Furfural by MOF-Derived Graphitic Carbon Wrapped FeCo Bimetallic Catalysts

Efficient one-pot transformation of furfural to pentanediol over Cu-modified cobalt-based catalysts

A highly accessible and robust carbon-coated cobalt nanoparticle catalyst for furfural hydrogenative valorization at mild reaction

Efficient Cu/FeOx catalyst with developed structure for catalytic transfer hydrogenation of furfural

Room-temperature fabrication of defective CoOxHy nanosheets with abundant oxygen vacancies and high porosity as efficient 5-hydroxymethylfurfural oxidation electrocatalysts

Insight into the catalytic mechanism of N-doped carbon nanotubes supported CoNi bimetallic catalyst boosts the base-free oxidative esterification of furfural

Co@NC Chainmail Nanowires for Thermo‐ and Electrocatalytic Oxidation of 2,5‐Bis(hydroxymethyl)furan to 2,5‐Furandicarboxylic Acid

Efficient electrochemical oxidation of the biomass platform compound furfural on a Ni0.48Co0.36O0.16 electrode

Co- and V 2 O 3 -Modified Ni-Based Nanocatalyst for 5-Hydroxymethylfurfural Electrooxidation