Abstract:While great progress has been achieved in all-polymer solar cells (all-PSCs), the efficiency of all-PSCs is primarily limited by polymer acceptors that lack a high extinction coefficient, high electron mobility, and good compatibility with polymer donors. Here we designed and developed a polymer acceptor PFA1 based on a non-fullerene acceptor framework with a fluorine substituent on the 1,1-dicyanomethylene-3-indanone unit. In combination with an electron-donating polymer, PTzBI-oF, the blend film presents an extended and intensified absorption profile, enhanced electron mobility, and favorable film morphology. The optimized all-PSCs exhibit a remarkably high efficiency of 15.11%, which is, to the best of our knowledge, the highest performance yet reported for an all-PSC. Of particular importance is the applicability of PFA1 as a universal polymer acceptor with a range of polymer donors to achieve impressively high efficiencies. These properties enable a new molecular design strategy for the construction of polymer acceptors toward applications in high-performance all-PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c02053?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c02053</a>.General synthesis and characterization, fabrication and characterization of polymer solar cells, 1H, 13C, and 19F NMR spectra of relevant monomers, ultraviolet–visible absorption spectra and CV plots of polymers, SCLC characteristics for single-carrier devices, PL response for films, dark J–V and VOC versus Plight characteristics of devices, contact-angle measurements, two-dimensional GIWAXS images, and GIWAXS fitting parameters (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c02053/suppl_file/nz0c02053_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient Polymer Solar Cells with Thin Active Layers Based on Alternating Polyfluorene Copolymer/Fullerene Bulk Heterojunctions

Light Management for Fullerene-Based Semitransparent Polymer Solar Cells with a Distributed Bragg Reflector

Binary non-fullerene-based polymer solar cells with a 430 nm thick active layer showing 15.39% efficiency and 73.38% fill factor

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

A Versatile Fluoro‐Containing Low‐Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells

High Efficiency of Flexible Polymer Solar Cell Based on Poly(3- Hexylthiophene)/fullerene

High Performance Solar Cell Based on Ultra-Thin Poly(3-Hexylthiophene): Fullerene Film Without Thermal and Solvent Annealing

Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

Enhanced Efficiency Of Polymer: Fullerene Bulk Heterojunction Solar Cells With The Insertion Of Thin Tio2

Semitransparent polymer solar cells with 12.37% efficiency and 18.6% average visible transmittance

High-efficiency all-polymer solar cells based on a pair of crystalline low-bandgap polymers.

Toward High‐Performance Semi‐Transparent Polymer Solar Cells: Optimization of Ultra‐Thin Light Absorbing Layer and Transparent Cathode Architecture

Semitransparent Polymer-Based Solar Cells with Aluminum-Doped Zinc Oxide Electrodes

Efficiency Enhancement for Bulk Heterojunction Photovoltaic Cells Via Incorporation of Alcohol Soluble Conjugated Polymer Interlayer

A Universal Fluorinated Polymer Acceptor Enables All-Polymer Solar Cells with >15% Efficiency

Efficient Organic Solar Cells with Polymer-Small Molecule: Fullerene Ternary Active Layers

Efficient All-Polymer Solar Cells Based on Blend of Tris(thienylenevinylene)-Substituted Polythiophene and Poly[perylene Diimide-Alt-bis(dithienothiophene)]

Difluoroterthiophene as promising block to build highly planar conjugated polymer for polymer photovoltaic cells

Over 18% efficiency ternary all-polymer solar cells with high photocurrent and fill factor