Abstract:The large volume of currently available fiber-reinforced polymer composites critically limits the intrinsic versatility of fibers such as high mechanical strength, heat resistance, and excellent thermal/electrical conductivity. We proposed a facile and widely applicable strategy to promote self-organization of randomly dispersed short carbon fibers (CFs) into a three-dimensionally continuous scaffold. The morphological evolution and structural reinforcement of the self-welded CF-polyamide 6 (PA6) scaffold in polystyrene (PS) matrix were investigated, with carbon black (CB) or titanium dioxide (TiO2) nanoparticles (NPs) selectively localized in the PA6 domains. Surprisingly, all of the PA6 droplets once dispersed in the PS matrix can migrate and evenly encapsulate onto the CF surface when 5.8 wt % CB is incorporated, whereas in the TiO2-filled system, the PA6 droplets preferentially segregate at the junction point of CFs to fasten the self-welded CF structure. In addition, a remarkable increase in the interfacial adhesive work between PA6 and CF was observed only when TiO2 is added, and a loading of even less than 0.8 wt % can effectively abruptly strengthen the self-welded CF scaffold. We clarified that the structural evolution is promoted by the nature of self-agglomeration of NPs. CB is highly capable of self-networking in the PA6 domain, resulting in high encapsulation of PA6, although the capillary force for preferential segregation of PA6 at the junction point of CFs is reduced. By contrast, the TiO2 particles tend to form compact aggregates. Such an agglomeration pattern, together with enhanced interfacial affinity, must contribute to a strong capillary force for the preferential segregation of PA6.

Self-Assembled Polydopamine for Enhanced Fracture Toughness of Carbon Nanofiber-Reinforced Phthalonitrile Composites

Functionalized Aramid Nanofibers Prepared by Polymerization Induced Self-Assembly for Simultaneously Reinforcing and Toughening of Epoxy and Carbon Fiber/epoxy Multiscale Composite

Study the Application of Polydopamine Preparation Technology in the Interface Modification of Phthalonitrile Composite

Modification of duel functioning PDA-PAADA capsules on interface and resin towards CFRPs with high strength and toughness

Bio-inspired Polydopamine Functionalization of Carbon Fiber for Improving the Interfacial Adhesion of Polypropylene Composites

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Interphase of Polydopamine Hollow Nanoparticles and Its Effects on the Interface Performance of CFRP

Enhanced fracture properties of continuous Cf/ZrB2-based composites with polydopamine-derived carbon boundary layer

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

Polyaniline and graphene nanocomposites for enhancing the interlaminar fracture toughness and thermo-mechanical properties of carbon fiber/epoxy composites

Optimized interfacial compatibility of carbon fiber and epoxy resin via controllable thickness and activated ingredients of polydopamine layer

Polydopamine particle in-situ assisted carbon fiber/CNTs brush with dynamic imine bonds for enhancing the interface properties of its polyamide 6 composites

Thermoplastics Reinforced with Self-Welded Short Carbon Fibers: Nanoparticle-Promoted Structural Evolution.

Structural design of "straw and clay" based on cellulose nanofiber/polydopamine and its interfacial stress dissipation mechanisms

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

Toughening Effect of Self-Assembled Thermoplastic Particles on Phthalonitrile Containing Benzoxazine and Improved Mechanical Properties in the Presence of Fibers Reinforcement

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

Enhanced Interphase Between Thermoplastic Matrix and UHMWPE Fiber Sized with CNT-modified Polydopamine Coating