Obtaining Ultrastrong and Ductile Steel with Hierarchical Lamellar Duplex Phase Microstructure by Two-Stage Martensitic Transformation Mechanism
Du, Hao,Gong, Yu,Xu, Yuantao,Zeng, Qiaoshi,Xiong, Lianghua,Li, Yu,Nie, Yihong,Wang, Junfeng,Jin, Xuejun
DOI: https://doi.org/10.1007/s11661-021-06582-1
2022-01-01
Abstract:In the present work, ultrahigh strength (yield strength approximately 2.1 gigapascals) and superior ductility (uniform elongation of 17 pct) were achieved by optimizing the partitioning–deformation–tempering (PDT) process of an initial duplex phase steel of austenite and martensite, by which transformation-induced plasticity (TRIP)-assisted hierarchically heterogeneous microstructure can be obtained. Remarkably, after the Lüders band deformation (the first deformation stage, Lüders band strain ~ 8 pct) at an ultrahigh stress level, a second deformation stage (elongation > 8 pct) occurred. The interaction mechanisms of Lüders band deformation and two-stage deformation and the resulting improved ductility were investigated systematically. Our detailed results demonstrate that this two-stage deformation mechanism is closely related to the two-stage martensitic transformations. More specifically, the dramatic variation in stress state from uniaxial tensile state to the triaxial stress state verified by finite element simulation during Lüders band deformation facilitates the concurrent explosive martensitic transformation of large austenite grains with several micrometers in the deforming Lüders band tracked by in situ synchrotron X-ray diffraction tensile tests. This also stimulates the activation of multiple slip systems, generating abundant crystallographic defects such as high-density dislocations, fine stacking faults, and twins in untransformed austenite with submicron grain size in the first martensitic transformation stage. These crystallographic defects in the preserved fine austenites serve as preferential nucleation sites for martensitic embryos in the second martensitic transformation stage, which follows the nucleation and transformation kinetics of strain-induced martensitic transformation and fully utilizes the TRIP effect. The two-stage controllable martensitic transformation mechanism provides new insight into the design strategy of ultrastrong steels with TRIP-assisted hierarchically heterogeneous microstructures for desirable strength-ductility synergy.