Abstract:This study focuses on the microstructure evolution of austenitic stainless steel during room‐temperature and low‐temperature rolling. Low‐temperature rolling reduces the stacking fault energy of austenitic stainless steel and promotes the formation of shear bands, ε‐martensite, and α′‐martensite. A heterogeneous nano/ultrafine‐grained structure with a high yield strength (908 MPa) and satisfactory elongation (43%) is obtained by low‐temperature rolling and annealing. An 18Cr–8Ni austenitic stainless steel is subjected to cold rolling at room temperature and low temperature (−50 °C) under different amounts of deformation. The samples cold rolled to 70% deformation are then annealed to obtain nano/ultrafine‐grained steels with a good strength–ductility combination. The effects of cold rolling temperature and deformation amount on the microstructure evolution of austenitic stainless steel during rolling are investigated. The results reveal that low‐temperature rolling reduces the stacking fault energy of austenitic stainless steel and promotes the formation of shear bands, ε‐martensite, and α′‐martensite. For both low‐temperature and room‐temperature rolling, the austenite and α′‐martensite, austenite and ε‐martensite, α′‐martensite and ε‐martensite pairs follow the Kurdjumov–Sachs (K–S), Shoji–Nishiyama (S–N), and Burgers orientation relationships, respectively. The deformation‐induced martensite transformation sequence of austenitic stainless steel follows the processes γ → α' and γ → ε → α'. A heterogeneous nano/ultrafine‐grained structure with a grain size of 560 nm is obtained by low‐temperature rolling and annealing; room‐temperature rolling achieves a grain size of 690 nm. The heterogeneous nano/ultrafine‐grained steel exhibits a high yield strength of 908 MPa and maintains a satisfactory total elongation of 43%.

Two-stage Rolling and Partial Annealing Enables Heterogeneous Structure and Strength-Ductility Enhancement for Austenitic Stainless Steel

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Overcoming the strength-ductility trade-off in metastable dual-phase heterogeneous structures using variable temperature rolling and annealing

Strength‐Ductility Synergy in an Austenitic Stainless Steel Processed by Warm Rolling and Subsequent Cryogenic Treatment

Towards Strength-Ductility Synergy Through Hierarchical Microstructure Design in an Austenitic Stainless Steel

Hierarchical Multiple Precursors Induced Heterogeneous Structures in Super Austenitic Stainless Steels by Cryogenic Rolling and Annealing

Microstructure Evolution and Mechanical Properties of Heterogeneous Nano/Ultrafine‐Grained Austenitic Stainless Steel Prepared by Low‐Temperature Rolling and Annealing

Ensuring the strength and ductility synergy in an austenitic stainless steel: single- or multi-phase hetero-structures design

Achievement of High Strength-Ductility Combination in Austenitic and Ferritic Duplex Stainless Steel by Heterogeneous Deformation

Heterogeneous Multi-Phase Grains Improving the Strength-Ductility Balance in Warm-Rolled Fe-18Mn-3Ti Steel

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Achieving Unexpected Strength and Ductility Synergies in Heterogeneous Metastable Lamellar Steels

Excellent cryogenic strength-ductility synergy in duplex stainless steel with heterogeneous lamella structure

Ultra-Fine Heterogeneous Microstructure Enables High Strength-Ductility in a Cold-Rolled Medium Mn Steel

Enhancing strength–ductility synergy in medium Mn steel with hetero-structured austenite developed by two-stage cyclic thermomechanical treatment and flash annealing

Enhancing Strength-Ductility Balance in Fe-Mn-Al-C-Ni Austenitic Low-Density Steel Via Intragranular Dual-Nanoprecipitation

Achieving Superior Strength and Ductility Combination in Fe–28Mn–8Al–1C Low Density Steel by Orthogonal Rolling

Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel

Tailoring Heterogeneous Microstructure in a High-Strength Low-Alloy Steel for Enhanced Strength-Toughness Balance

Tailoring hetero-grained austenite via a cyclic thermomechanical process for achieving ultrahigh strength-ductility in medium-Mn steel

Strengthening high-nitrogen austenitic stainless steel via constructing multi-scaled heterostructure