Abstract:The classical switching-table-based direct torque control (ST-DTC) suffers from issues such as large torque ripples, significant current harmonics, and variable switching frequency. In this paper, a novel ST-DTC is proposed to improve the current and torque steady-state performance for dual three-phase permanent magnet synchronous motor (DTP-PMSM). Firstly, proportional resonance (PR) controllers are used in the x-y subspace, and the x-y reference voltage generated by PR controllers is modulated by three fixed vectors based on the analysis of flux and torque slopes of voltage vectors with different amplitudes. This reduces current harmonics and computational burden of modulating the x-y reference voltage. Secondly, duty-ratio modulation is employed to reduce the torque ripple. However, under the traditional torque regulator, the duty-ratio modulation exists a torque range where it cannot achieve the instantaneous zero error of torque at the end of the control period. Therefore, the feedback value of the torque regulator is modified to further suppress torque ripple. Furthermore, to prevent generating incorrect switch sequences caused by the short dwell time of vectors and maintain the thermal balance of the inverter, an optimization of the switching sequence is performed. Finally, experimental results are presented to validate the effectiveness of the proposed method.

Duty-Ratio-Based Direct Torque Control Strategy for a Novel Dual-Armature Winding Dual-PM Machine with Array Torque Components

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Direct Torque Control for Three-Phase Open-End Winding PMSM With Common DC Bus Based on Duty Ratio Modulation

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Novel Dual Winding Dual PM Flux Modulated Machines with Array Type Torque

Torque-Performance Improvement for Direct Torque-Controlled PMSM Drives Based on Duty-Ratio Regulation

A Novel Switching-Table-Based Direct Torque Control with Improved Current and Torque Steady-State Performance for Dual Three-Phase PMSM

Direct Torque Control Schemes for Dual Three-Phase PMSM Considering Unbalanced DC-link Voltages

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Field Orientation Control for a Dual Winding Dual Magnet Flux Modulated Machine with Torque Distribution Capability

Improved Stator/Rotor-Pole Number Combinations for Torque Ripple Reduction in Doubly Salient PM Machines

A Novel Duty-Controlled DTC of a Surface PMSM Drive With Reduced Torque and Flux Ripples

A Novel Direct Torque Control Method with the Compensation of Rotating EMF to Reduce Torque Ripple for Permanent Magnet Synchronous Motor Drives

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

Analysis and Validation of Dual Armature Winding Magnetless Machines with Multi-Torque Component

A Novel MTPA Control Strategy for Multiple Torque Component Single Air Gap Magnetless Machines