Abstract:Stereolithography based 3D printing of microfluidics for prototyping has gained a lot of attention due to several advantages such as fast production, cost-effectiveness, and versatility over traditional photolithography-based microfabrication techniques. However, existing consumer focused SLA 3D printers struggle to fabricate functional microfluidic devices due to several challenges associated with micron-scale 3D printing. Here, we explore the origins and mechanism of the associated failure modes followed by presenting guidelines to overcome these challenges. The prescribed method works completely with existing consumer class inexpensive SLA printers without any modifications to reliably print PDMS cast microfluidic channels with channel sizes as low as ~75 μm and embedded channels with channel sizes as low ~200 μm. We developed a custom multi-resin formulation by incorporating Polyethylene glycol diacrylate (PEGDA) and Ethylene glycol polyether acrylate (EGPEA) as the monomer units to achieve micron sized printed features with tunable mechanical and optical properties. By incorporating multiple resins with different mechanical properties, we were able to achieve spatial control over the stiffness of the cured resin enabling us to incorporate both flexible and rigid components within a single 3D printed microfluidic chip. We demonstrate the utility of this technique by 3D printing an integrated pressure-actuated pneumatic valve (with flexible cured resin) in an otherwise rigid and clear microfluidic device that can be fabricated in a one-step process from a single CAD file. We also demonstrate the utility of this technique by integrating a fully functional finger-actuated microfluidic pump. The versatility and accessibility of the demonstrated fabrication method have the potential to reduce our reliance on expensive and time-consuming photolithographic techniques for microfluidic chip fabrication and thus drastically lowering our barrier to entry in microfluidics research.

Fabrication of Low-Cost, High-Resolution Open Capillary Microfluidics towards Self-Sustaining, Long-Term Hydration of Engineered Living Materials

Capillary-Based Microfluidic Fabrication of Liquid Metal Microspheres Toward Functional Microelectrodes and Photothermal Medium.

High-resolution low-cost LCD 3D printing of microfluidics

Fabrication of endothelialized capillary-like microchannel networks using sacrificial thermoresponsive microfibers

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Facile Fabrication of Hollow Hydrogel Microfiber Via 3D Printing-Assisted Microfluidics and Its Application As a Biomimetic Blood Capillary

High Resolution Dual Material Stereolithography for Monolithic Microdevices

Hybrid Printing of Fully Integrated Microfluidic Devices for Biosensing

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Additive Manufacturing of Engineered Living Materials with Bio‐Augmented Mechanical Properties and Resistance to Degradation

Facile Photopatterning of Perfusable Microchannels in Synthetic Hydrogels to Recreate Microphysiological Environments

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

Democratizing access to microfluidics: Rapid prototyping of open microchannels with low-cost LCD 3D printers

Microfluidic-Based Continuous Fabrication of Ultrathin Hydrogel Films with Controllable Thickness

Multiscale fabrication of scalable biomimetic 3-D, integrated micro-nanochannels network in PDMS for solute exchange

3D embedded printing of microfluidic devices using a functional silicone composite support bath

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Continuous Fabrication and Assembly of Spatial Cell-Laden Fibers for a Tissue-Like Construct Via a Photolithographic-Based Microfluidic Chip.

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device