Abstract:The fabrication of microfluidic devices has progressed from cleanroom manufacturing to replica molding in polymers, and more recently to direct manufacturing by subtractive (e.g., laser machining) and additive (e.g., 3D printing) techniques, notably digital light processing (DLP) photopolymerization. However, many methods require technical expertise and while DLP 3D printers remain expensive at a cost ∼15-30K USD with ∼8M pixels that are 25-40 µm in size. Here, we introduce (i) the use of low-cost (∼150-600 USD) liquid crystal display (LCD) photopolymerization 3D printing with ∼8M-58M pixels that are 18-35 µm in size for direct microfluidic device fabrication and (ii) a poly(ethylene glycol) diacrylate-based ink developed for LCD 3D printing (PLInk). We optimized PLInk for high resolution, fast 3D printing and biocompatibility while considering the illumination inhomogeneity and low power density of LCD 3D printers. We made lateral features as small as 75 µm, 22-µm-thick embedded membranes, and circular channels with a 110 µm radius. We 3D printed microfluidic devices previously manufactured by other methods, including an embedded 3D micromixer, a membrane microvalve, and an autonomous capillaric circuit (CC) deployed for interferon-γ detection with excellent performance (limit of detection: 12 pg mL , CV: 6.8%), and we demonstrated compatibility with cell culture. Finally, large area manufacturing was illustrated by printing 42 CCs with embedded microchannels in <45 min. LCD 3D printing together with tailored inks pave the way for democratizing access to high-resolution manufacturing of ready-to-use microfluidic devices by anyone, anywhere.

What problem does this paper attempt to address?

The main problems that this paper attempts to solve are the high manufacturing cost and complex technology of microfluidic devices. Specifically, the paper introduces a method of directly manufacturing microfluidic devices using a low - cost (about $150 - 600) liquid - crystal - display (LCD) photopolymerization 3D printing technology, and develops an ink (PLInk) based on polyethylene glycol diacrylate (PEGDA) for LCD 3D printing. This method not only reduces the manufacturing cost, but also improves the resolution and printing speed, while ensuring biocompatibility. ### Main research objectives: 1. **Reduce cost**: Reduce the manufacturing cost of microfluidic devices by using a low - cost LCD 3D printer. 2. **Improve resolution**: Achieve the manufacturing of microfluidic devices with high resolution (pixel size of 18 - 35 µm). 3. **Increase printing speed**: Optimize the ink formula to achieve fast 3D printing. 4. **Ensure biocompatibility**: Ensure that the printing materials are non - toxic to cells and suitable for biomedical applications. ### Specific methods: - **Hardware**: Use low - cost LCD 3D printers, which have a high number of pixels (8M - 58M pixels) and a small pixel size (18 - 50 µm). - **Ink formula**: Develop an ink (PLInk) based on PEGDA, which contains a photoinitiator (TPO), a light absorber (ITX) and a cross - linker (PETTA), to adapt to the low light intensity and light inhomogeneity of LCD 3D printers. - **Testing and verification**: Verify the feasibility and performance of this method by printing and testing a variety of microfluidic devices, including embedded 3D mixers, membrane microvalves and autonomous capillary circuits (CC). ### Main achievements: - Achieve high - precision printing of embedded membranes with lateral features as small as 75 µm and a thickness of 22 µm, and circular channels with a radius of 110 µm. - Successfully print a variety of microfluidic devices, including embedded 3D mixers, membrane microvalves and autonomous capillary circuits (CC), and show good biocompatibility in cell culture. - Demonstrate the potential for large - scale manufacturing and high - throughput production capacity by printing 42 CCs at a time. ### Conclusion: This research successfully realizes the manufacturing of high - resolution, fast, and biocompatible microfluidic devices through low - cost LCD 3D printing technology and an optimized ink formula, providing a new way for the popularization and application of microfluidic technology.

High-resolution low-cost LCD 3D printing of microfluidics

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Democratizing access to microfluidics: Rapid prototyping of open microchannels with low-cost LCD 3D printers

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips.

Scalable Printing of Bionic Multiscale Channel Networks Through Digital Light Processing-Based Three-Dimensional Printing Process.

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

A 'print-pause-print' protocol for 3D printing microfluidics using multimaterial stereolithography

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Digital Light Processing 3D printing for biological applications of polydimethylsiloxane-based microfluidics

Printing 3D Microfluidic Chips with a 3D Sugar Printer

High-Efficiency High-Resolution Multimaterial Fabrication For Digital Light Processing-Based Three-Dimensional Printing

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy

Multipath projection stereolithography (MPS) for 3D printing microfluidic devices

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications