Abstract:We propose an ultra-compact novel wavelength multiplexer employing a (N + 1) × (N + 1) arrayed waveguide grating (AWG) and a polarization-combiner-rotator (PCR) on the SOI platform, to realize a multiplexing for 2N wavelengths with a spacing of Δλ. The (N + 1) × (N + 1) AWG works at a bidirectional way to provide two groups of N × 1 wavelength multiplexing with each group having a channel spacing of 2×Δλ, and the central wavelengths of all input channels in one group have a wavelength shift of Δλ with respect to those in the other group. The double channel spacing results in a significant decrease on the footprint of the (N + 1) × (N + 1) AWG-based multiplexer compared with a conventional 2N × 1 AWG multiplexer with the same wavelength spacing Δλ. Due to the fact that a single mode fiber is insensitive to the polarization of input light, if we consider short reach datacom applications such as 100/400 GbE, the two separate multiplexing outputs of the (N + 1) × (N + 1) AWG can be combined as one output with one half wavelengths working at TE polarization and the other at TM polarization by employing a low loss and broadband PCR. In the experiment, we demonstrate a 16 × 200 GHz multiplexer based on a 9 × 9 AWG. The experimental results show that the on-chip loss of the fabricated multiplexer is 2.7 dB and the loss uniformity is 0.5 dB. The 1-dB and 3-dB bandwidths are >0.56 nm (i.e., 35% of the wavelength spacing) and >1.1 nm (i.e., 69% of the wavelength spacing), respectively. They can also be further increased by decreasing the gap between adjacent input waveguides at the interfaces of star couplers of the designed AWG without inducing an excess loss. The proposed multiplexer has great potential for application to future super large capacity (> Tb/s) data transmission systems.

1 X N All-Logic Optical Switch Based on Polymer Platform Using Multimode Interferometer

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

Compact waveguide devices based on multimode interference by using area modulation method

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

Analysis on Multimode Interference Coupler-Based 1×3 Optical Switch with Mono-Compound Modulation Region

A 4×4 MMI-MZ optical switch matrix on SOI based on carrier injection

Development of GaAs 1×N and N×N MMI Optical Switch for Optical Communications

Compact All-Optical Switches Based on Photon-Induced Suppression of Mode Interference

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

Novel Wavelength Multiplexer Using (<italic>N</italic> + 1) × (<italic>N</italic> + 1) Arrayed Waveguide Grating and Polarization-Combiner-Rotator on SOI Platform

Scalable Nonblocking &Lt;inline-Formula> &Lt;tex-Math Notation="latex">$4\times4$ &Lt;/tex-Math> &Lt;/inline-Formula> Silicon Optical Switch Based on Dual-Microring Resonators

Low-voltage and Compact Polymeric Optical Switches Using a Mach–Zehnder Interferometer and N Side-Coupled Electro-Optic Microrings

Multimode Optical Switch Based on Cascaded Mach-Zehnder Interferometer Waveguides

Mach–Zehnder-Based Four-Port Switching Module on SOI

Low-voltage Micromachining-Based Scalable Optical Switch

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Low-loss Silica Waveguide 1×8 Thermo-Optic Switch Based on Large-Scale Multimode Interference Couplers

Broadband 32 X 32 Strictly-Nonblocking Optical Switch on a Multi-Layer Si3N4-on-SOI Platform

Design and Fabrication of 2×2 InP/InGaAsP Optical Switch

Compact, Scalable, Fast‐Response Multimode 2 × 2 Optical Switch Based on Inverse Design