Abstract:Energy-selective surfaces (ESSs) have attracted significant attention in electromagnetic (EM) compatibility and protection applications due to their nonlinear transmission capabilities in response to varying EM field intensities. This article proposes the design of a narrowband high-selectivity ESS for 5G wireless communications based on a dual-stopband equivalent circuit model (ECM). This ECM allows for the adjustment of bandwidth without affecting the resonant frequency of the operating band, achieved by directly controlling the resonant frequencies of the stopbands flanking the passband. Consequently, the stopbands can be brought closer together or moved further apart, indirectly adjusting the operating bandwidth. A physical model of a narrowband ESS operating at 3.5 GHz is presented based on the dual-stopband ECM. Both steady-and transient-state simulations demonstrate the efficacy of the design. The simulation results indicate that under low-power signals, the insertion loss (IL) at 3.5 GHz is 0.3 dB, and within the frequency range of 3.31–3.53 GHz, the IL remains below 1 dB. Under high-power conditions, the shielding effectiveness (SE) reaches up to 48 dB, with an SE greater than 20 dB in the range from 3.11 to 3.93 GHz. The fabricated ESS was measured in both rectangular waveguide and free-space environments, whose experimental results were in good agreement with simulation data at various power levels. These findings suggest that the proposed ESS offers significant potential for applications in EM shielding and compatibility, particularly in 5G communication systems.

A GPS Antenna Protection System Loaded with Energy Selective Surface

An L-band narrowband energy selective surface design

Design of L-band Energy-Selective Surface with Circular Ring Gap

An S-band Broadband Energy Selective Surface Design

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

Electromagnetic Simulation Analysis of Energy Selective Surface

High Performance Energy Selective Surface based on Equivalent Circuit Design Approach

Investigation on Time- and Frequency-Domain Responses of Some Complex Composite Structures in the Presence of High-Power Electromagnetic Pulses

Efficient analysis of transient responses of some antenna arrays in the presence of high-power electromagnetic pulses (HP-EMP)

BANDPASS FREQUENCY SELECTIVE SURFACE WITH SHARP SIDEBANDS FOR 5G ELECTROMAGNETIC SHIELDING OF FIXED SATELLITE SYSTEM IN C-BAND

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

Metasurface: Enhancing Gain of Antenna and Energy Harvesting System Design

A Narrowband Energy-Selective Surface with High-Selectivity for 5G Wireless Communications

A Novel Frequency Selective Surface Applied for EMI Suppression in Integrated Circuit Package

Anti-Impact And Over-Loading Projectile Conformal Antennas For Gps

Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Design and Implementation of an Adaptive Space–Time Antenna Array for GPS Receivers

Energy Selective Antenna: Concept, Design, and Experiment

A novel high-altitude electromagnetic pulse (HEMP) protection circuit for RF applications.

Miniaturised element frequency selective surface design for high power microwave applications