Abstract:Package lid and heat sink incorporated in PCB or chip package are often used for solving the heat dissipation problem, which is easy to form a resonant cavity with the metal ground plane of the package substrate, and consequently result in the noise current coupling to the package cover and heat sink through the capacitive effect, causing serious EMI problems, therefore, we propose a new resistive film-based super material absorber structure. In this paper, a unit of the proposed structure has resistive film patterns on the FR-4 substrate in front of the conductive plate, and the top layer uses Jerusalem cross, square and L-shaped resistive film to achieve bandwidth expansion. The unit size of the entire absorber is 0.15$\lambda_{L}\times 0.15\lambda_{L}(\lambda_{L}$ is the wavelength corresponding to the lowest cut-off frequency), while the thickness is only $0.07\lambda_{L}$. The simulation results show that the absorption rates are more than 90% in the frequency range from 22-40GHz. When the electromagnetic waves are perpendicular to the proposed resistive film absorber, it is insensitive to the polarization of TE and TM modes, and the absorption rates remain stable when the incident wave is wide-angle. Based on the equivalent medium theory, it is demonstrated that the structure achieves good impedance matching with free space in a wide frequency band. Meanwhile, the absorption mechanism of this structure is analyzed by the distribution of electric field and surface current, and the equivalent circuit model of resistive film absorber is established. The proposed resistive film absorber is characterized by miniaturization, ultra-wideband, high absorption rates, and insensitivity to polarization, providing a new idea for radiation suppression of highly integrated electronic devices.

A Novel Frequency Selective Surface Applied for EMI Suppression in Integrated Circuit Package

A Novel 3-D Frequency Selective Structure for Radiation Leakage Suppression in Sub-6G Highly Integrated Package

A Novel Dual-Band Frequency Selective Surface (FSS)

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

A Novel Heatsink with Mushroom-type EBG Structure for EMI Radiation Suppression

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Electromagnetic Radiation in the Range of GHz of Integrated Circuit Package with Heat Sink

Design of a Tapered Frequency Selective Surface for the Suppression of Edge Wave Scattering

A Novel Adaptive Electromagnetic Cancellation Frequency Selective Surface

Angularly Independent Frequency Selective Surface with Good Ventilation for Millimeter Wave EM Shielding

A Novel Frequency Selective Surface for the RCS Reduction of Antenna Array

Design of Highly Selective Ultrawideband FSS Based on Deep Learning for EMI Shielding in 5G Bands

A Miniaturized Ultra-wideband Resistive Film Absorber for Radiation Suppression

A Novel Miniaturized Ultra-Wideband Frequency Selective Surface With Rapid Band Edge

Ultrathin, Electrically Small Noise Suppression Sheet for Microwave Cavities of 3-D Integrated Circuits: Design Methodology and Realization

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Frequency Selective Surface With Quasi-Elliptic Bandpass Response Using Radiation Null of Patch Antenna

Analysis of a Novel Resistive Film Absorber for Suppression of Electromagnetic Radiation in System-in-Packages

Novel Frequency Selective Surface with Quasi-Elliptic Response