Abstract:The junction temperature is a very important parameter for monitoring power electronics converters based on MOSFET transistors. They offer the possibility of switching at relatively higher frequencies than other transistors like IGTBTs. However, the electrical parameters of MOSFETs are highly thermally dependent. The thermo-dependence of MOSFET electrical parameters is rarely taken into consideration when implementing control strategies, for many technological reasons, such as the difficulty of measuring the junction temperature. In practice, the junction temperature of transistors is inaccessible for direct measurement. The presence of a gel covering the chips, that provides electrical and thermal insulation, makes measurement by infrared thermography impossible. Furthermore, direct thermocouple measurement cannot be implemented due to the electromagnetic disturbances in the environment. Several researchers have attempted to correlate chip temperature with thermosensitive electrical parameters. In the present work, a thermal convolutive model has been developed to estimate the junction temperatures of two MOSFET transistors belonging to the same electronic circuit from external temperature measurements in two well-chosen locations (far away enough from the junction to avoid electromagnetic interference), using also the measured power dissipated on each chip. The thermal coupling between the two transistors has been considered in the form of mutual transmittances. The model was first calibrated using three-dimensional numerical simulations in COMSOL Multiphysics, followed by an experimental study. The results are very promising, illustrating the robustness of the convolutional model.

Efficient Junction Temperature Estimation of SiC Power Modules Based on Temperature-Dependent Lumped Thermal Model

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

A junction temperature estimation method of SiC power module for real time application in a traction inverter

Transient Thermal Modeling of Power Semiconductors for Long-Term Load Profiles

Junction Temperature Estimation of a SiC MOSFET Module for 800V High-Voltage Application in Electric Vehicles

Junction temperature estimation approach based on TSEPs in multichip IGBT modules

Real-Time Average Junction Temperature Estimation for Multichip IGBT Modules With Low Computational Cost

Dynamic junction temperature estimation via built-in negative thermal coefficient (NTC) thermistor in high power IGBT modules

A Thermal Network Model for Multichip Power Modules Enabling to Characterize the Thermal Coupling Effects

Thermal Characterization of Silicon Carbide MOSFET Module Suitable for High-Temperature Computationally Efficient Thermal-Profile Prediction

A Transient 3-D Thermal Modeling Method for IGBT Modules Considering Uneven Power Losses and Cooling Conditions

A Simplification Method for Power Device Thermal Modeling with Quantitative Error Analysis

An Adaptive Electrothermal Model for Estimating the Junction Temperature of Power Device

Simulation of Thermal Distribution in SiC Power Modules with Pinfin Heatsink Based on Lattice Boltzmann Method

Measurement of Thermal Parameters of SiC MOSFET Module by Case Temperature

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

A convolutional model for estimating the junction temperatures of SiC MOSFET transistors

An Online Junction Temperature Estimating Method for SiC MOSFETs Based on Steady-State Features and GPR

A Temperature-Dependent Cauer Model Simulation of IGBT Module with Analytical Thermal Impedance Characterization

Characterization of Electro-Thermal Coupling Behaviors and Safe Operating Area of SiC MOSFET Modules in Pulsed Power Applications

Development of a steady state electrothermal cosimulation model of SiC power modules