Abstract:MgO activated slag and bentonite (MASB) slurry is a new and promising vertical barrier material along with excellent performances. Some solid wastes, such as phosphogypsum (PG), red mud (RM), fly ash and so on, show a positive effect on the performances of alkali activated slag. However, few studies focus on the recycling of these solid wastes in the system of MgO activated slag. The purpose of this paper is to study the incorporation of phosphogypsum and red mud on the mechanical property, permeability and hydration process of MASB slurry. The results showed that the addition of PG could significantly improve the mechanical strength and anti-permeability of the MASB slurry at early age (7 days), where the unconfined compressive strength (UCS) increased from 793.1 kPa to 1395.7 kPa and the permeability coefficient declined from 16.1 × 10−7 cm/s to 1.7 × 10−7 cm/s. In contrast, the introduction of RM had some negative effects on its macroscopic properties, resulting the UCS decreased to 580.4 kPa and the permeability coefficient rose to 25.9 × 10−7 cm/s at 7 days. The ettringite formed in the PG blended MASB slurry led to a notable increase in the absolute solid volume, which could satisfactorily fill the pores and block the pore channels. The combined addition of RM and PG had a synergistic effect on the promotion of hydration process and optimization of the pore structure, contributing to establish a low permeability and high mechanical strength matrix. The overall findings indicate that the use of solid wastes in the MASB slurry can not only improve its engineering properties, but also promotes its sustainability and economical efficiency, holding a great potential for popularization and application.

Recycling Red Mud for Low-Carbon Pavement: Performance Evaluation and Environment Risk Assessment

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

Sustainable utilization of bauxite residue (Red Mud) as a road material in pavements: A critical review

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Utilization of Red Mud with High Radiation for Preparation of Autoclaved Aerated Concrete (AAC): Performances and Microstructural Analysis

Performance Evaluation and Feasibility Study on Reuse of Reclaimed Epoxy Asphalt Pavement (REAP)

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Valorization of recycled wastes in pavement preventive maintenance: A review on reclaimed asphalt pavement and recycled waste tire

Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluation

Material innovation and performance optimization of multi-solid waste-based composite grouting materials for semi-flexible pavements

Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers

The Use of Waste Materials Red Mud and Fly Ash as Road Embankment Fill

Recycled polyester fiber reinforcing red mud-improved volcanic ash as a sustainable construction material

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Recycling of reclaimed subbase materials in flexible pavement design

Recycling of phosphogypsum and red mud in low carbon and green cementitious materials for vertical barrier

Feasibility of rapid-regeneration utilization in situ for waste cement-stabilized macadam

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

A systematic characterization of the mixture of red mud and bottom ash as a geomaterial: an efficient utilization in subgrade pavement

Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes