Abstract:Currently, various types of recyclable materials are used in civil engineering applications. One of the future challenges in the civil engineering field facing sustainability and the bulk utilization of waste materials without affecting the performance of the product related to the civil engineering field. Presence of bulk amounts of disposed and demolished materials including aggregates and undecomposed recycled polymers can be recycled. The main aim of reducing environmental impact and also reduction in the cost. Present research focusing on recycled polymers as partial replacement of bitumen in addition to recycled coarse aggregate in different percentages are investigated for its feasibility used in road construction. To achieve the objectives of the current research, 6 batches of bituminous samples were prepared and each case considered three samples for repeatability. The first batch is considered as a control sample without adding Recycled Coarse Aggregates (RCA) and recycled polymer. The second batch consists of 15% partial replacement of bitumen using polymer without recycled aggregate. Remaining batches 3 to 6 were 15% partial replacement of bitumen with polymer and partial replacement of coarse aggregates using recycled coarse aggregate say 25%, 50%, 75%, and 100%. Each batch was tested by reliable and standard tests in order to determine the most efficient mix (batch). The testing methods followed in this investigation are sieve analysis test, impact test, Los Angeles test, penetration test and marshal test. The results of sieve analysis test showed that the fineness modulus value for RCA equals to 4% with uniform graded graph. The specific gravity test results showed that RCA specific gravity is 2.61 which indicates that RCA is considered as coarse grained soils. Moreover, the Impact test for RCA equals 9.3%. In addition, the result for Los Angeles for RCA value is 19.07% and comparing it with the standard and it should be less than 30% is suitable for road construction. Furthermore, penetration test results of 15% partial replacement of bitumen using polymer showed that the average value equals 58 mm compared to 63.7 mm for bitumen without polymer. Finally, the result obtained from the Marshall Stability test showed that batch 5 partial replacement of bitumen 15% using polymer and the partially replaced normal coarse aggregate 75% with RCA gives better results in all aspects. A fruitful conclusion from this study is to follow the approach of utilization of recycled coarse aggregate along with recycled polymers in road construction. Doi: 10.28991/HEF-2020-01-03-01 Full Text: PDF

Recycling of reclaimed subbase materials in flexible pavement design

Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course

Performance Evaluation and Feasibility Study on Reuse of Reclaimed Epoxy Asphalt Pavement (REAP)

Long-Term Durability Studies on Chemically Treated Reclaimed Asphalt Pavement Material as a Base Layer for Pavements

Eco-Friendly Asphalt Approach for the Development of Sustainable Roads

A Method to Quantify Reclaimed Asphalt Pavement Binder Availability (Effective RAP Binder) in Recycled Asphalt Mixes

Technical, Economic, and Environmental Sustainability Assessment of Reclaimed Asphalt and Waste Polyethylene Terephthalate Pavements

Mechanical Performance of Reclaimed Asphalt Pavement Modified with Waste Frying Oil and Crumb Rubber

Laboratory study of the effect of oil-based recycling agents on high RAP asphalt mixtures

Feasibility Study of Reclaimed Asphalt Pavements (RAP) as Recycled Aggregates Used in Rigid Pavement Construction

Large-scale direct shear testing of waste crushed rock reinforced with waste rubber as pavement base/subbase materials

Experimental and predictive study of self-compacting concrete containing reclaimed asphalt pavement

Dynamic Properties of Reclaimed Asphalt Pavement–Green Cement Blends for Road Base Layer

Performance Evaluation of Recycled Asphalt Mixtures Containing Construction and Demolition Waste Applicated as Pavement Base

Sustainable use of reclaimed asphalt pavement (RAP) in pavement applications—a review

Laboratory Evaluation of the Use of Cement-Treated Construction and Demolition Materials in Pavement Base and Subbase Applications

Assessing the environmental and technical feasibility of re-valorization of demolished road material constructed from dredged sediments

Bonding, rheological, and physiochemical characteristics of reclaimed asphalt rejuvenated by crumb rubber modified binder

Effects of Waste Frying Oil and Crumb Rubber on the Characteristics of a Reclaimed Asphalt Pavement Binder

Performance of reclaimed asphalt pavements containing recycled waste plastics

Recycled Asphalt Pavement Materials in Transport Pavement Infrastructure: Sustainability Analysis & Metrics