Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

Ppb-level Miniaturized Flow Gas Sensor Based on Photoacoustic Spectroscopy with Advanced 3D Printed T-type Resonant Cell

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

BLADE acquisition method improves T2-weighted MR images of the female pelvis compared with a standard fast spin-echo sequence.

Compact optical fiber photoacoustic gas sensor with integrated multi-pass cell

Highly Sensitive Photoacoustic Gas Sensor with Micro-Embedded Acoustic Resonator for Gas Leakage Detection.

FURTHER STUDIES ON GLUCOSE METABOLISM IN EXPERIMENTAL POTASSIUM DEPLETION. EFFECT OF INSULIN, GLUCAGON, AND MUSCULAR EXERCISE.

Designing and experimental verification of a photoacoustic flow sensor using computational fluid dynamics

High-sensitivity miniature dual-resonance photoacoustic sensor based on silicon cantilever beam for trace gas sensing

Yeast as an expression system for the study of P-glycoprotein and other ABC transporters.

Platelet-derived growth factor triggers translocation of the insulin-regulatable glucose transporter (type 4) predominantly through phosphatidylinositol 3-kinase binding sites on the receptor.

Design and structural optimization of T-resonators for highly sensitive photoacoustic trace gas detection

High sensitivity miniaturized multi-pass absorption enhanced differential Helmholtz photoacoustic gas sensor

Design and Implementation of a Miniaturized Photoacoustic Spectroscopy CO2 Sensor

Highly Sensitive Sphere-Tube Coupled Photoacoustic Cell Suitable for Detection of a Variety of Trace Gases: NO2 as an Example

Miniaturized methane detection system based on photoacoustic spectroscopy

A Compact NO2 Gas Sensor with an Optimized Photoacoustic Cell and 450 nm-LD

Ultra-high sensitive multi-pass absorption enhanced fiber-optic photoacoustic gas analyzer

Miniaturized all-fiber photoacoustic spectroscopy with high spatiotemporal resolution

T-type cell mediated photoacoustic spectroscopy for simultaneous detection of multi-component gases based on triple resonance modality

Miniaturized nonresonant photoacoustic gas analyzer for CO2 detection

Ppb-level detection of methane based on an optimized T-type photoacoustic cell and a NIR diode laser