Abstract:The cutterhead driving system of a tunnel boring machine may easily get jammed in fault zones driven by electro-motors of low torque capacity. To improve the geological adaptability, this work presents a novel electro-hydraulic hybrid cutterhead driving system to control high-torque hydro-motors as followers under the torque master–slave strategy together with electro-motors. Specific half closed-type pump–motor system is designed, the work pressure of the hydro-motor is regulated by proportional overflow valve to track the torque of the main electro-motor, and a variable displacement pump is controlled to track the expected speed of the main electro-motor with stable overflow via the proportional overflow valve. Feed-forward control principles are derived via the inner mechanism analyses of the proportional overflow valve and variable displacement pump, and proportional and integral separated feedbacks are also introduced to build compound controllers for the tracking of pressure and pump displacement, respectively. The hybrid driving experiments on a Φ2.5 m tunnel boring machine rig indicate that the hydro-motor could track 1.5 times the main electro-motor torque with error within ±15.2 N m against load change and system oscillation, and the error ratios of hydro-motor and slave electro-motor are similar at normal load and fixed speed. Furthermore, jammed cutterhead could be restarted with each hydro-motor supplying double torque of the main electro-motor, and the required assembly power is only 25% of alternative electro-motors.

Design and Analysis of Cutter Changing Robot for Large Diameter Shield Tunneling Machine

Accessibility and Trajectory Planning of Cutter Changing Robot Arm for Large-Diameter Slurry Shield

Research into the intelligent control of the cutter head drive system in Shield tunnelling machine based on the pattern recognition

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

Design and Test of the Cutter-devices Hydraulic System of the Shield Tunneling Machine Based on System Recomposed Technology

Research on Snake-Like Robot for Cutter Inspection in Tunnel Boring Machine.

Design and Experiment of Electro-Hydraulic Proportional Control System for the Cutter-Head Drive of the Shield Tunneling Machine

Closed - Loop Hydraulic System of Cutter- Devices for Shield Tunneling Machine

Disc cutters’ layout design of the full-face rock tunnel boring machine (TBM) using a cooperative coevolutionary algorithm

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

Variable speed pump control system for driving cutter head of test shield tunneling machine

Nonlinear Cutterhead Pose Control of Large-Diameter Slurry Shields in Complicated Stratum

Optimal Control of a Novel Cutter Head Driving System for Tunnel Boring Machine

A Novel Cutterhead Off-Stuck Strategy for Tunnel Boring Machine Based on Electro-Hydraulic Hybrid Driving

Energy Saving of Cutterhead Hydraulic Drive System of Shield Tunneling Machine

Collaborative Design of Atmospheric Cutterhead Opening and Disc Cutter Arrangement

Method to Avoid the Structural Interference of the Thrust System of a Shield Tunneling Machine

High-performance Adaptive Robust Control with Balanced Torque Allocation for the Over-Actuated Cutter-Head Driving System in Tunnel Boring Machine

Design and Dimension Optimization of Cutter Disassembly Mechanism for Shield Tunneling Machine

Design and Simulation of Electro-Hydraulic Hybird Driving System for Tbm Cutterhead