Abstract:Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost. Nevertheless, the elevated Mg : Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges, such as prolonged lithium extraction periods, diminished lithium extraction efficiency, and considerable environmental pollution. In this work, LiFePO 4 (LFP) served as the electrode material for electrochemical lithium extraction. The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent. This approach resulted in high lithium extraction efficiency and extended cycle life. When the single conductive agent of acetylene black (AB) or multiwalled carbon nanotubes (MWCNTs) was replaced with the mixed conductive agent of AB/MWCNTs, the average diffusion coefficient of Li + in the electrode increased from 2.35 × 10 −9 or 1.77 × 10 −9 to 4.21 × 10 −9 cm 2 ·s −1 . At the current density of 20 mA·g −1 , the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent (AB) to 35.62 mg with the mixed conductive agent (AB/MWCNTs). When the mixed conductive agent was used, the capacity retention of the electrode after 30 cycles reached 82.9%, which was considerably higher than the capacity retention of 65.8% obtained when the single AB was utilized. Meanwhile, the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance. When the conductive agent content decreased or the loading capacity increased, the electrode containing the mixed conductive agent continued to show excellent electrochemical performance. Furthermore, a self-designed, highly efficient, continuous lithium extraction device was constructed. The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device. This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

Identifying Electrochemical Performance of LiFePO4 with Different Exposed Crystal Facets for Voltammetric Determination of Li+

Facet dependent ion channel of iron phosphate for electrochemical lithium extraction

Enhanced Lithium Extraction from Brines: Prelithiation Effect of FePO4 with Size and Morphology Control

Inaccuracy Principle and Dissolution Mechanism of Lithium Iron Phosphate for Selective Lithium Extraction from Brines

Ionic transport kinetics of selective electrochemical lithium extraction from brines

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO4 electrodes

In-situ mass-electrochemical study of surface redox potential and interfacial chemical reactions of Li(Na)FePO4 nanocrystals for Li(Na)-ion batteries

Single-Crystal Α-Fe2o3 with Engineered Exposed (001) Facet for High-Rate, Long-Cycle-Life Lithium-Ion Battery Anode.

Lithium-Ion Intercalation Behavior of Lifepo4 in Aqueous and Nonaqueous Electrolyte Solutions

Effect of Lithium Bis(Trifluoromethylsulfonyl)Imide on the High-Temperature Behavior of Lifepo4 Positive Electrode

Insights into the thermodynamics of selective lithium extraction with lithium iron phosphate from high salinity system

Identifying critical features of iron phosphate particle for lithium preference

Understanding the key role of {100} exposed crystal facets on the electrochemistry of the spinel LiMn2O4 cathode

Self‐Oxidated Hybrid Conductive Network Enables Efficient Electrochemical Lithium Extraction Under High‐Altitude Environment

Space Matters: Li+ Conduction Versus Strain Effect at Fepo4/Lifepo4 Interface

Constructing the 3D-conductive network-incorporated thick electrodes via melamine foam for lithium extraction

In Situ Investigation of Lattice Oxygen Loss from Preferentially Faceted Electrodeposited LiCoO 2 via Scanning Electrochemical Microscopy

A Solid-State Electrolyte Based on Li0.95 Na0.05 FePO4 for Lithium Metal Batteries.

Orientation-Dependent Lithium Miscibility Gap in LiFePO4

Uncovering the Solvation Structure of LiPF6‐Based Localized Saturated Electrolytes and Their Effect on LiNiO2‐Based Lithium‐Metal Batteries

Rational Lithium Salt Molecule Tuning for Fast Charging/Discharging Lithium Metal Battery