Abstract:Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost. Nevertheless, the elevated Mg : Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges, such as prolonged lithium extraction periods, diminished lithium extraction efficiency, and considerable environmental pollution. In this work, LiFePO 4 (LFP) served as the electrode material for electrochemical lithium extraction. The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent. This approach resulted in high lithium extraction efficiency and extended cycle life. When the single conductive agent of acetylene black (AB) or multiwalled carbon nanotubes (MWCNTs) was replaced with the mixed conductive agent of AB/MWCNTs, the average diffusion coefficient of Li + in the electrode increased from 2.35 × 10 −9 or 1.77 × 10 −9 to 4.21 × 10 −9 cm 2 ·s −1 . At the current density of 20 mA·g −1 , the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent (AB) to 35.62 mg with the mixed conductive agent (AB/MWCNTs). When the mixed conductive agent was used, the capacity retention of the electrode after 30 cycles reached 82.9%, which was considerably higher than the capacity retention of 65.8% obtained when the single AB was utilized. Meanwhile, the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance. When the conductive agent content decreased or the loading capacity increased, the electrode containing the mixed conductive agent continued to show excellent electrochemical performance. Furthermore, a self-designed, highly efficient, continuous lithium extraction device was constructed. The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device. This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

Constructing the 3D-conductive network-incorporated thick electrodes via melamine foam for lithium extraction

Enhancing lithium extraction efficiency from salt lake brines through three-dimensional conductive network-incorporated thick electrodes

Biochar-enhanced three-dimensional conductive network thick electrodes for efficient lithium extraction from salt lake brines with high Magnesia-lithium ratios

Efficient Lithium Extraction from Brine Using a Three-Dimensional Nanostructured Hybrid Inorganic-Gel Framework Electrode

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO4 electrodes

3D Printing Lithium Salt towards Dendrite-free Lithium Anodes

Self‐Oxidated Hybrid Conductive Network Enables Efficient Electrochemical Lithium Extraction Under High‐Altitude Environment

Coordinating ionic and electronic conductivity on 3D porous host enabling deep dense lithium deposition toward high-capacity lithium metal anode

Electrochemical lithium recovery from brine with high Mg2+/Li+ ratio using mesoporous λ-MnO2/LiMn2O4 modified 3D graphite felt electrodes

Boosting the Electrochemical Performance of 3D Composite Lithium Metal Anodes Through Synergistic Structure and Interface Engineering

Enhanced Lithium Extraction from Brines: Prelithiation Effect of FePO4 with Size and Morphology Control

Sandwich, Vertical-Channeled Thick Electrodes With High Rate And Cycle Performance

A Scalable Slurry Process To Fabricate A 3d Lithiophilic And Conductive Framework For A High Performance Lithium Metal Anode

Tailored LMO@COF composite electrodes for direct electrochemical lithium extraction from high-temperature brines

A scalable slurry process to 3D lithiophilic and conductive framework for high performance lithium metal anode

Pulsed electric field controlled lithium extraction process by LMO/MXene composite electrode from brines

Construction of nitrogen-doped carbon cladding LiMn2O4 film electrode with enhanced stability for electrochemically selective extraction of lithium ions

Competitive Li-ion Coordination for Constructing a Three-Dimensional Transport Network to Achieve Ultra-High Ionic Conductivity of a Composite Solid-State Electrolyte

Hydrophilic Modification Using Polydopamine on Core–Shell Li 1.6 Mn 1.6 O 4 @Carbon Electrodes for Lithium Extraction from Lake Brine

Application of electrodeposited Cu-metal nanoflake structures as 3D current collector in lithium-metal batteries

Cross-linked PVDF- b -PAA composite binder enhanced LiMn 2 O 4 /C film based electrode for selective extraction of lithium from brine with a high Mg/Li ratio