Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Silicon-based Microjet Array Impingement Boiling Heat Transfer with SDS Surfactant Solutions

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Experimental study on subcooled pool boiling heat transfer of sodium dodecyl sulfate surfactant solution

Heat Dissipation Characteristics of a Jetting Staggered Microchannel for Cooling a Large-area High-performance SOC Chip

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Microfluidic controllable synthesis and size-dependent flow boiling heat transfer of silica nanofluids

Cooling high heat flux with flow boiling in 2D-structured radial microchannel heat sink

Experimental study of flow boiling in microchannel heat sink enhanced with partially in-line pin fins fence arrangement

Liquid Super‐Spreading Boosted High‐Performance Jet‐Flow Boiling for Enhancement of Phase‐Change Cooling

Pool Boiling Heat Transfer on a Nanoscale Roughness-Enhanced Superhydrophilic Surface for Accelerated Quenching in Water

Experimental study of subcooled flow boiling in microchannel heat sinks integrated with different embedded pin fin arrays microstructures

Numerical study on thermal and hydraulic performance of a stacked-plate jet-impingement/microchannel heat sink

Experimental and computational investigation on synergistic enhancement spray cooling using micropillars and capillary-driven wicking hybrid structures

An open superhydrophilic microchannel heat sink for thin film boiling with a high coefficient of performance

Synergistic Effects of Hydrophilic-Hydrophobic Porous Structures for Enhancing Nucleate Pool Boiling Heat Transfer

Pressure Drop and Flow Boiling Instabilities in Silicon Microchannel Heat Sinks

Enhancing Heat Transfer Of Air-Cooled Heat Sinks Using Piezoelectrically-Driven Agitators And Synthetic Jets

Acoustofluidics-assisted strategy of zinc oxide nanoarrays for enhancement of phase-change chip cooling

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement