Abstract:Heterogeneous catalytic oxidation, as an efficient advanced treatment technology, has been gradually applied in industrial wastewater treatment. The fixed bed technique is one of the most popular catalytic ozonation methods. However, few studies have concentrated on the long-term operation effects on catalysts. In this study, we conducted long-term (similar to 5 years) observations of the operation of the largest petrochemical wastewater treatment plant (treatment capacity 120,000 m(3)/d) with catalytic ozonation technology in China. A commercial catalyst, which uses Al2O3 pellets supporting copper oxide was applied in this plant. The results showed that the catalytic efficiency gradually decreased from 60.65% to 25.98% since 2018, and the ozone dosage to COD removal ratio (ozone/COD) also increased from 0.82 to 1.93 mg/mg as the running time continued. By means of the comparison and characterization of fresh catalyst and used catalyst, a "mucus layer" was formed by the adsorption of negatively charged extracellular polymeric substances on the positively charged catalyst surface and the interception of the catalyst layer. The mucus layer significantly reduced the catalytic efficiency by isolating ozone with catalytic active sites and releasing extra organic contaminants during the catalytic process resulting in 53.97 % TOC increase in the batch tea Meanwhile, regeneration experiments revealed that the TOC removal efficiency was 4.76% and 43.48% in presence of washed catalysts and calcinated catalysts, respectively. Compared with the fresh catalyst, 73% of the catalytic activity was recovered for calcinated catalyst. Consequently, this study provides much practical information, showing positive effects on the promotion of catalytic ozonation application in actual wastewater treatment.

Novel Electrolytic Regeneration Method for Cyclic Regeneration of Ozone Decomposition MnOx Catalysts.

Novel Electrolytic Regeneration Method for Cyclic Regeneration of Ozone Decomposition MnO x Catalysts

Regeneration of Ozone Decomposition Catalysts by Elimination of O22- from Oxygen Vacancies

Regeneration of Ozone Decomposition Catalysts by Elimination of O2 2 2- from Oxygen Vacancies

Recycled Cathodes in Rechargeable Aqueous Batteries as Ready-Made Electrodes for Oxygen Evolution Catalysis

Utilization of electrochemical treatment and surface reconstruction to achieve long lasting catalyst for NOx removal

A Novel Electro-Catalytic Membrane Contactor for Improving the Efficiency of Ozone on Wastewater Treatment

A new concept analogous to homogeneous catalysis to construct in-situ regenerative electrodes for long-term oxygen evolution reaction

Deactivated Pt Electrocatalysts for the Oxygen Reduction Reaction: The Regeneration Mechanism and a Regenerative Protocol

A magnetic-void-porous MnFe2O4/carbon microspheres nano-catalyst for catalytic ozonation: Preparation, performance and mechanism

Unlocking efficient and robust ozone decomposition with CNT-confined manganese oxide via synergistic electronic modulation

Highly Efficient Electrosynthesis of Oximes from Nitrates and Carbonyl Compounds in Acidic Media

Recycling application of waste Li–MnO2 batteries as efficient catalysts based on electrochemical lithiation to improve catalytic activity

A General Method for Regenerating Catalytic Electrodes

Spontaneous Intra-Electron Transfer Within Rgo@fe2o3-Mno Catalyst Promotes Long-Term NOx Reduction at Ambient Conditions

Sequential Electrocatalysis by Single Molybdenum Atoms/clusters Doped on Carbon Nanotubes for Removing Organic Contaminants from Wastewater

High-valence Ni3+ Construction and Stability by Electrochemical De-Lithiation Boosting Oxygen Evolution

A thorough observation of an ozonation catalyst under long-term practical operation: Deactivation mechanism and regeneration

NO Reduction Over a Novel SCR Catalyst Regenerated From Deactivated Commercial DeNO_x Catalyst

Simultaneously Promoted Reactive Manganese Species and Hydroxyl Radical Generation by Electro-Permanganate with Low Additive Ozone.

Electrochemical denitrification by a recyclable cobalt oxide cathode: Rapid recovery and selective catalysis