Abstract:The ±1100 kV UHVDC wall bushing is the important power equipment in the ±1100 kV DC power transmission project of China. However, the reported literatures rarely mention its design method and the optimization of its insulation structure. In this paper, two specific designing schemes including the resin impregnated paper (RIP) condenser and the metal-shielded core have been both adopted in the design of the wall bushing. Moreover, the actual operating environment and the rated parameters of the ±1100 kV UHVDC wall bushing have been analyzed in detail. Then, the nonlinear finite element method (FEM) analysis has been applied in the three-dimensional electric stress simulation of the UHVDC wall bushing. The electric field and temperature dependencies of the composite insulation used in the wall bushing have been taken into account. The E-field simulation results indicate that with the RIP condenser, the potential and electric field distribution can be much more uniform along the composite insulator of the bushing. Therefore, the compact design of the wall bushing can be obtained by this designing scheme. On the other hand, with the type of the metal-shielded core, the high E-field strength areas are mainly concentrated on the metal shield and the outer grading ring of the wall bushing. Therefore, the nonlinear FEM was applied in the structure optimization of the internal metal-shielded system used in the wall bushing. Finally, the maximum E-field strength of the wall bushing can meet the control requirement. Based on the simulation results and the optimization structure, the ±660 kV scaled prototype of the UHVDC wall bushing has been produced and passed through all the type tests according to the IEC 62199. The feasibility of the design of the ±1100 kV UHVDC wall bushing has been verified. This paper can provide the theoretical guidelines for the design, manufacture and operation of the UHVDC wall bushing.

Research on the Electrical Performance Design Criteria of the Adaptive Bushing Based on Nonlinear Materials

Electrothermal Coupling Filed Calculation of 200 kV Adaptive Bushing

Design of adaptive bushing based on field grading materials

Electric Field Improvement for High-Voltage Bushings

Advances in HVdc Bushing Using Nonlinear Materials: Theory, Materials, Structure, and Realization

Main Insulation Optimization of DC Wall Bushing Based on Field Grading Material

Design and dielectric characteristics of the ??1100 kV UHVDC wall bushing in china

Investigation on distribution of electro-thermal coupled field and improved design of 1100 kV converter valve-side bushing

Dielectric Characteristics of the ±1100kV UHVDC Wall Bushing with SF6 Gas Insulation

Influence of Defects on the Electric Field Distribution of ±800kV Butt-type DC Wall Bushing

Investigation on distribution of electro-thermal coupling fields influenced by HVDC bushing insulation properties

Simulation analysis and calculation of electric field distribution characteristics of UHV wall bushing

Optimization Design of Bushing of Distribution Switchgear Equipment

Electric Field Analysis Of +/- 1100 Kv Resin Impregnated Paper Uhvdc Wall Bushing Under Different Voltage Forms

Electric field calculation and shield optimization for 1000kV GIS bushing

Design of UHVDC Wall Bushing and its Electric Field Simulation

A method for nonlinear electric-thermal coupling calculations of bushings based on unbiased gradient-free smooth domains

Application of Electrothermal Coupling Field Analysis to Electric Field Distribution Calculation of ±800 kV Wall Bushing

Analysis of Insulation Structure Design for High Altitude UHV Reactor Bushing

Optimization of Clearance Test Area for ± 1100 kV UHVDC Wall Bushing in AC and DC Partial Discharge Measurement

Analysis of electrical contact characteristics of strap contacts used in high voltage bushings under eccentric conditions