Abstract:Preparing antioxidant coatings to address the inherent oxidation sensitivity of carbon fiber-reinforced carbon aerogel (C/CA) composites is a feasible way to promote their application in oxidizing environments as thermal insulation materials. However, preparing the coatings with excellent oxidation and ablation resistance while avoiding evident damage to the C/CA substrate still remains a challenge. Herein, a SiC@SiO2 nanowire-toughened ZrB2-SiC/SiC bilayer coating with a large thickness of 500 mu m was prepared on C/CA using a one-step low-temperature reaction sintering method, which simultaneously formed a sintered outer layer with even-distributed nanowires and a siliconized gradient inner layer. By courtesy of the synergic thermal response of the layers and the crack deflection induced by the nanowires, the resulting coating has moderate residual compressive stress of 0.08-1.22 GPa in the interface, high interfacial bonding strength of 6.02 MPa, and good fracture toughness of 4.36 MPam1/2. Benefited from the optimum components and improved structure, the coating shows excellent cyclic ablation resistance with linear ablation rates of 0.1 mu m/s at 1650 degrees C for 1500 s (300 s x 5 cycles) and 0.4 mu m/s at 1850 degrees C for 900 s (300 s x 3 cycles). The one-step preparation strategy contributes to little damage to the substrate, thus showing the well-preserved mechanical and thermal insulation properties.

Oxidation Failure Behavior and Repair of the Damaged SiC-ZrB2/SiC 2 /sic Coating of C/C Composites

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Convenient Reparation of SiC-Coated C/C Composites by the Slurry Painting Method

Oxidation Protection and Behavior of In-Situ Zirconium Diboride–silicon Carbide Coating for Carbon/carbon Composites

A ZrB2–SiC/SiC Oxidation Protective Dual-Layer Coating for Carbon/carbon Composites

Oxidation protection and behavior of C/C composites with an in situ SiC nanowire-SiC-Si/SiC-Si coating

Enhanced oxidation resistance of Mo-modified Si-SiC coating on C/C composites by laser-inducing

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Oxidation Protection of C/C Composites with a Multilayer Coating of SiC and Si + SiC + SiC Nanowires

Interfacial modification and oxidation resistance behavior of a CVD-SiC coating for C/SiC composites

Preoxidation and Crack-Healing Behavior of ZrB<sub>2</sub>-SiC Ceramic Composite

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Oxidation Protection of C/C Composites by Ultra Long SiC Nanowire-Reinforced SiC–Si Coating

Oxidation protection of SiC-coated C/C composites by SiC nanowire-toughened CrSi 2-SiC-Si coating

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

Toughening by SiC Nanowires in a Dense SiC–Si Ceramic Coating for Oxidation Protection of C/C Composites

Effect of SiC Nanowires on the Mechanical and Oxidation Protective Ability of SiC Coating for C/C Composites

Facile Preparation of a SiC@SiO2 Nanowire-Toughened ZrB2–SiC/SiC Bilayer Coating with Good Interfacial Bonding, High Toughness, and Excellent Cyclic Ablation Resistance on C/CA Composites

Oxidation-protective and Mechanical Properties of SiC Nanowire-Toughened Si–Mo–Cr Composite Coating for C/C Composites