Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Tailoring the Crystalline Structures and Mechanical Properties of IN718 Alloy Repaired by Wire-Fed Electron Beam Directed Energy Deposition Through a Custom-Designed Heat Treatment Process

Microstructure evolution and mechanical properties of wire-fed electron beam directed energy deposition repaired GH4169 superalloy

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Tailoring Laves Phase and Mechanical Properties of Directed Energy Deposited Inconel 718 Thin-Wall Via a Gradient Laser Power Method

Effect of Post-Deposition Heat Treatments on the Microstructure and Tensile Properties of Wire-Fed Electron Beam Directed Energy Deposition GH4169 Ni-based Alloy

Studies on the Microstructure and Mechanical Properties of AlCu4MgSi Aluminum Alloy Repaired Via Electron Beam Directed Energy Deposition

Rolling-assisted direct energy deposited Inconel 718: Microstructural evolution and mechanical properties after optimized heat treatment

Additive manufacturing-based repair of IN718 superalloy and high-cycle fatigue assessment of the joint

Effect of deposition strategy and post processing on microstructure and mechanical properties of serviced Inconel 625 parts repaired using laser directed energy deposition

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Effect of Ultrasonic Vibration and Heat Treatment on Microstructure and Mechanical Properties of IN718 Superalloy by Laser Direct Forming

Laves Phase Control and Tensile Properties Optimization of DED-arc Repaired 718plus Components Through the Addition of TiC and Cr2C3

Laves phase control and tensile properties optimization of DED-arc repaired 718Plus components through the addition of TiC and Cr 2 C 3

Influence of post-heat treatments on the microstructure and mechanical properties of Inconel 738 produced by laser directed energy deposition

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

The Customized Heat Treatment for Enhancing the High-Temperature Durability of Laser-Directed Energy Deposition-Repaired Single-Crystal Superalloys

Crack Inhibition of Non-Weldable Inconel 738 Alloy in Ultrasound-Assisted Laser Directed Energy Deposition

Effect of Hot-Wire Method on Microstructure and Mechanical Properties of Wire Arc Additive Repaired Superalloy.

The effect of interval pulsed laser deposition on the microstructure and mechanical properties of Inconel 718 parts using laser directed energy deposition

The Influence of Solution Temperature on Microstructure Evolution and Mechanical Properties of ATI 718plus Repaired by Wire and Arc Additive Manufacturing