Abstract:Abstract With the increasing interest in adopting additively manufactured (AM) IN718 for high-temperature applications, driven by the design and manufacturing flexibility offered by AM technologies, understanding its fatigue performance is crucial before full-scale adoption. This paper reviews the recent literature on the high-temperature fatigue behavior of AM IN718. The review focuses on two primary stages of fatigue damage: fatigue crack initiation and fatigue crack growth. Notably, most existing studies have concentrated on fatigue crack initiation, and thus, this review emphasizes this aspect. In the fatigue crack initiation stage, discrepancies in low cycle fatigue (LCF) and high cycle fatigue (HCF) life performances are observed in the literature. Some studies have shown that the average room temperature (RT) fatigue life of AM IN718 is superior or comparable to that at high temperatures in the LCF regime. Conversely, in the HCF regime, high-temperature fatigue life is sometimes found to be superior to that at room temperature. However, other studies indicate no clear trend regarding the effect of temperature on HCF life. Although various mechanisms have been proposed to either improve or degrade fatigue performance across the LCF, HCF, and very high cycle fatigue (VHCF) regimes, the underlying reasons for the distinct behaviors in these regimes remain unclear. Competing mechanisms, such as surface oxide formation and thermally driven dislocations glide, can potentially enhance or reduce fatigue life. However, the interaction and control of these mechanisms over the fatigue strength of AM IN718 are not yet fully understood. Systematic studies are required to elucidate their roles in high-temperature fatigue. Microstructural investigations have suggested that controlling the formation and precipitation of deleterious secondary phases is crucial for tailoring the high-temperature fatigue strength of AM IN718. Therefore, it is imperative to design heat treatment protocols informed by a comprehensive understanding of phase formation kinetics to improve the high-temperature fatigue performance of AM IN718 compared to their traditionally manufactured (TM) counterparts. This is particularly important for IN718 parts manufactured using directed energy deposition technology, which currently lacks standardized heat treatment procedures. The review also identifies open research areas and provides recommendations for future work to address these gaps.

Additive manufacturing-based repair of IN718 superalloy and high-cycle fatigue assessment of the joint

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Tailoring the Crystalline Structures and Mechanical Properties of IN718 Alloy Repaired by Wire-Fed Electron Beam Directed Energy Deposition Through a Custom-Designed Heat Treatment Process

Effect of deposition strategy and post processing on microstructure and mechanical properties of serviced Inconel 625 parts repaired using laser directed energy deposition

Distribution of Microstructure, Elastic Modulus and Residual Stress Near the Interface in Laser Repaired GH4169 Superalloy

Superior High-Cycle Fatigue Property Through In-Situ Precipitation of Α' Martensite in Additively Repaired Titanium Alloy

Examination of steel compatibility with additive manufacturing and repair via laser directed energy deposition

Crystal Plasticity Quantification of Anisotropic Tensile and Fatigue Properties in Laser Powder Bed Fused Inconel 718 Superalloy

Multi-scale Study of Subsurface Fatigue Cracking Behavior of Laser-Powder Bed Fused Inconel 718 at Stress Ratios and Temperatures

Friction deposition additive manufacturing of alloy 718: Effect of post-heat treatment on microstructures and mechanical properties

The 650 °C Tensile Deformation of Graded IN718-René41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition

Multi-axial Fatigue Life Assessment of Additively Manufactured Nickel-Based Superalloys

Very-High-Cycle-Fatigue Property of IN 718 Manufactured by Selective Laser Melting at Elevated Temperature: Microstructure-Related Failure Behavior and Life Prediction

High Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review

Exploring the role of Type-II residual stresses in a laser powder bed fusion nickel-based superalloy using measurement and modeling

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Multi-physics Approach to Predict Fatigue Behavior of High Strength Aluminum Alloy Repaired via Additive Friction Stir Deposition

Improved High-temperature Fatigue Performance of Laser Directed Energy Deposited Ni-based Superalloy by Regulating the Heat Treatment

Mechanical properties of hybrid additively manufactured Inconel 718 parts created via thermal control after secondary treatment processes

Microstructure evolution and mechanical properties of a nickel-based superalloy repaired using wire and arc additive manufacturing