Abstract:CoCrNi medium entropy alloy (MEA) exhibits significant potential as a structural component for engineering applications. However, the traditional processing methods for pursuing the superior mechanical properties of CoCrNi MEA are often time-consuming and inefficient. Laser powder bed fusion (LPBF) offers substantial processing flexibility without the need for complex secondary processing. In this study, we optimized the processing parameters for CoCrNi MEA through an orthogonal experimental design, achieving as-printed CoCrNi components with a relative density of up to 99.4%. The microstructure of the as-printed CoCrNi revealed hierarchical features, including the molten pools, equiaxed and elongated columnar grains, sub-grain cellular microstructures, and high-density dislocation networks. The mechanical properties of as-printed CoCrNi were exceptional, demonstrating a synergistic combination of strength and ductility (yield strength: approximately 660.91 MPa, tensile strength: approximately 892.78 MPa, elongation: approximately 33.28%, and a product of strength and elongation: 27.45 GPa%). Experimental characterization elucidated the activation and interplay of mechanisms such as dislocations, stacking faults, twinning-induced plasticity, and transformation-induced plasticity. These mechanisms collaboratively enhanced the refinement and heterogeneity of substructures, thereby endowing the as-printed CoCrNi with significant strength-ductility synergy. Molecular dynamics simulations indicated that, in the initial stages of plastic deformation, a significant activation of Shockley partial dislocations occurred, leading to the formation of stacking faults and the emergence of Hexagonal Close-Packed (HCP) phases. As plastic deformation progressed, a reverse phase transformation from HCP to Face-Centered Cubic (FCC) took place, resulting in the formation of nanotwins. This transformation generated a heterogeneous microstructure comprised of both nanotwins and HCP phases, suggesting a sequential twinning and phase transformation pathway in as-printed CoCrNi: from FCC to HCP, and subsequently to FCC nanotwins.

Achieving Strength-Ductility Synergy of Spark Plasma Sintered (cocrni)94al3ti3 Medium-Entropy Alloy Via Post-Sintering In-Situ Precipitation Treatment

Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures

Achieving exceptional strength-ductility combination in a novel L1 2 nanoparticles-strengthened high-entropy alloy via conventional casting

Enhancement on mechanical properties of CoCrNi medium entropy alloy via cold spray additive manufacturing associated with sintering

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Exceptional strength-ductility synergy in additively manufactured (CoCrNi)90Al5Ti5 medium-entropy alloy by heat treatment

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion

Tailoring recrystallization for optimum mechanical combination in Ni-rich medium-entropy alloy via simplified thermomechanical treatment

Tailoring nanoprecipitates to achieve ultrahigh strength (CoCrNi)94.5W3Ta2.5 medium-entropy alloys

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

In-situ TiC x N y nanoparticle reinforced crack-free CoCrFeNi medium-entropy alloy matrix nanocomposites with high strength and ductility via laser powder bed fusion

Twinning induced strain hardening and plasticity in a γ''-precipitated medium-entropy alloy with ultrahigh yield strength

Powder plasma arc additive manufacturing of (AlTi) 2x (CoCrNi) 100–2x medium-entropy alloys: Microstructure evolution and mechanical properties

Concurrent Recrystallization and Precipitation for Combination of Superior Precipitation and Grain Boundary Hardening in Co37Cr20Ni37Ti3Al3 High-Entropy Alloy

An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy