Abstract:Sulfide electrolyte all-solid-state lithium-ion batteries (ASSLBs) that have inherently nonflammable properties have improved greatly over the past decade. However, determining both the stable and functional electrode components to pair with these solid electrolytes requires significant investigation. Solid electrolyte comprises 20–40% of the composite cathode electrode, which improves the ionic conductivity. However, this results in thick electrolyte that blocks the electron pathways in the electrode, significantly lowering the electrochemical performance. The application of conductive carbon material is required to overcome this issue, and, hence, determining the carbon properties that result in the most stable performance in the sulfide solid electrolyte is vital. This study analyzes the effect of the cathode conductive additive’s morphology on the electrochemical performance of sulfide electrolyte-based ASSLBs. Carbon black (CB) and carbon nanotubes (CNTs), which provide electron pathways at the nanoscale and sub-micron scale, and carbon nanofiber (CNF), which provides electron pathways at the tens-of-microns scale, are all tested individually as potential conductive additives. When the CNF, with its high crystallinity, is used as a conductive material, the electrochemical performance shows an excellent initial discharge capacity of 191.78 mAh/g and a 50-cycle capacity retention of 83.9%. Conversely, the CB and the CNTs, with their shorter pathways and significantly increased surface area, show a relatively low electrochemical performance. By using the CNF to provide excellent electrical conductivity to the electrode, the polarization is suppressed. Furthermore, the interfacial impedance across the charge transfer region is also reduced over 50 cycles compared with the CB and CNT composite cells. These findings stringently analyze and emphasize the importance of the morphology of the carbon conductive additives in the ASSLB cathode electrodes, with improvements in the electrochemical performance being realized through the application of long-form two-dimensional crystalline CNFs.

Porous Hollow Carbon Alkali-Activated Nanoonions As a Conductive Additive for High-Rate Lithium Primary Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Conductive Additives for Improving the Rate Capability of Cathode Materials in Secondary Lithium Batteries

Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Improved Electrochemical Performance of Porous Fe3o4/Carbon Core/Shell Nanorods As an Anode for Lithium-Ion Batteries

Hollow Porous CoSnO x Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

Encapsulating Iron Oxide@Carbon in Carbon Nanofibers As Stable Electric Conductive Network for Lithium-Ion Batteries

Solvation Structure Tuning Induces LiF/Li3N‐Rich CEI and SEI Interfaces for Superior Li/CFx Batteries

Organic Nitrate Additive for High‐Rate and Large‐Capacity Lithium Metal Anode in Carbonate Electrolyte

Carbon Nanotubes Act As Conductive Additives in the Cathode of Lithium Ion Batteries

Synergetic Enhancement of the Electronic/ionic Conductivity of a Li-ion Battery by Fabrication of a Carbon-Coated Nanoporous SnOxSb Alloy Anode

Structure-activity relationship of carbon additives in cathodes for advanced capacitor batteries

Fluorinated Carbon Nanohorns as Cathode Materials for Ultra‐High Power Li/CFx Batteries

Superior-capacity Binder-Free Anode Electrode for Lithium-Ion Batteries: CoxMny NizO Nanosheets with Metal/oxygen Vacancies Directly Formed on Cu Foil

Enhanced Lithium Storage Capability in Li-Ion Batteries Using Porous 3d Co3o4 Nanofiber Anodes

Highly ordered carbon nanotubes to improve the conductivity of LiNi0.8Co0.15Al0.05O2 for Li-ion batteries

The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries

Conductivity Optimization Via Intertwined CNTs Between TiNb2O7@C Microspheres for a Superior Performance Li-ion Battery Anode.

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi 0.8 Co 0.1 Mn 0.1 O 2 Lithium Metal Batteries

Improvement of cycling stability of high energy density LiNi0.83Co0.12Mn0.05O2/silicon-graphite batteries via cathode prelithiation agent