Abstract:The improved understandings of the mechanical properties as well as deformation mechanisms at cryogenic temperatures are the prerequisite for realizing the application of any new engineering materials to cryogenic industries. Here, a (CoCrNi) 94 Al 3 Ti 3 medium entropy alloy (MEA) with nanoscale L1 2 coherent precipitates and heterogeneous grain structures was prepared by co-doping Al and Ti elements with subsequent cold rolling and heat treatment processes. The mechanical properties were evaluated at the temperature range of 293–113 K. The ultimate strength of the MEA increases almost linearly from 1326 to 1695 MPa as the temperature decreases from 293 to 113 K, while the total elongation remains approximately constant of ∼35%. The underlying deformation and strengthening mechanisms were investigated using various characterization techniques. Due to the effect of co-doped Al/Ti on channel width of the matrix and the increasing critical twinning stress induced by heterogeneous ultrafine grain size, the formation of deformation twins is inhibited at all temperatures. Consequently, only a slight increase of the deformation twins and stacking faults in the deformed specimens with a decreasing temperature, which leads to the relative temperature-independence of the ductility. The dislocation cutting mechanism of L1 2 coherent precipitates and the heterodeformation induced (HDI) hardening both significantly contribute to the strain hardening so that an excellent combination of strength and ductility is obtained. Additionally, the evolution of lattice friction stress with deformation temperature is determined by quantitative analysis, indicating an approximately linear relationship between the lattice friction and temperature. The present work provides new insights into the strategy of achieving outstanding strength-ductility synergy of the MEA under the wide temperature range by coupling heterogeneous ultrafine-grained structure and coherent precipitation strategy.

Enhanced Strength and Ductility in (cocrni)92mo2al6 Medium Entropy Alloy Via Dual Heterogeneous Structures

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Twin-induced transformation strengthening of CoCrNi-based medium-entropy alloy with a gradient nanostructure

Heterostructuring an equiatomic CoNiFe medium-entropy alloy for enhanced yield strength and ductility synergy

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

Dual enhancement in strength and ductility of Fe-rich medium-entropy alloys via an in situ formed heterogeneous multi-phase structure

Annealing-induced multi-heterogeneous microstructure strengthening in FeCoCrNiMo 0.2 high-entropy alloys

Heterogeneous Structure Design to Strengthen Carbon-Containing CoCrFeNi High Entropy Alloy

Achieving an excellent combination of strength and ductility in a single-phase metastable medium-entropy alloy

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Nanolamellar medium entropy alloy composites with high strength and large plasticity

Tailoring nanoprecipitates to achieve ultrahigh strength (CoCrNi)94.5W3Ta2.5 medium-entropy alloys