Abstract:State-of-the-art Li–S batteries (LSBs) still suffer from a series of technical issues, including rapid capacity fading, due to polysulfide dissolution and shuttling, low active material loading in the cathode, and sluggish reaction kinetics. These challenges can be combatted through the application of efficient sulfur hosts that provide ample void structures, maintain electronic and ionic pathways, and confine soluble polysulfides within the cathode. This work uses sustainable glucose and sodium chloride as the precursors in a "sweet and salty" synthesis method to produce hierarchical porous carbon as the sulfur host for LSB cathodes. The as-prepared hierarchical porous carbon host (HPCH) is shown to have an exceptionally large specific surface area of 1540 m2 g–1 with a favorable pore size distribution due to the unique solvent/porogen system employed during synthesis. The porous matrix can adsorb the polysulfides at the cathode with the hydroxyl and carbonyl groups distributed on the HPCH surface. Systematic electrochemical investigation reveals that the HPCH also possesses both high ionic and electronic conductivity, which allows a reversible capacity of nearly 500 mA h·g–1 to be obtained after 500 cycles at 0.5 C and enhanced performance at high C rates. This work suggests that the as-prepared HPCH could be an excellent material to host other soluble electrode materials in electrochemical storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00367.Dispersion of carbon materials in aqueous and ethanoic KOH solutions; N2 adsorption/desorption isotherm, pore size distribution, XRD pattern, and Raman spectra from the CB sample; high-magnification SEM images of S/CB and S/HPCH cathodes; equivalent circuit from EIS analysis; fitting results from EIS analysis; and SEM images and EDS mapping of the high-loading S/CB and S/HPCH cathodes (PDF)This article has not yet been cited by other publications.

Rhizopus Hyphae Carbon As Efficient Sulfur Host for Lithium–Sulfur Batteries

Multifunctional Hyphae Carbon Powering Lithium–Sulfur Batteries

Hyphae Carbon Coupled with Gel Composite Assembly for Construction of Advanced Carbon/Sulfur Cathodes for Lithium–Sulfur Batteries

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Radially Inwardly Aligned Hierarchical Porous Carbon for Ultra‐Long‐Life Lithium–Sulfur Batteries

Sustainable “Sweet and Salty” Synthesis of Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Heteroatom doping carbon film derived from hyphae as a self-supporting cathode for advanced lithium sulfur batteries

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Sustainable, Inexpensive, Naturally Multi-Functionalized Biomass Carbon for Both Li Metal Anode and Sulfur Cathode

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium–sulfur batteries

Electrosprayed Multiscale Porous Carbon Microspheres As Sulfur Hosts for Long-Life Lithium-Sulfur Batteries

Hyphae‐mediated Bioassembly of Carbon Fibers Derivatives for Advanced Battery Energy Storage

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Iron, cobalt co-embedded in situ graphitized xerogel-derived carbon as sulfur host for ultrahigh rate and high-performance lithium-sulfur batteries

Bio-mass derived hierarchically porous and high surface area carbon as an efficient sulfur host for lithium-sulfur batteries

Optimization of Microporous Carbon Structures for Lithium–Sulfur Battery Applications in Carbonate‐Based Electrolyte

Promoting sulfur immobilization by a hierarchical morphology of hollow carbon nanosphere clusters for high-stability Li–S battery

Activated Carbon with Ultrahigh Specific Surface Area Synthesized from Natural Plant Material for Lithium–sulfur Batteries

Hybrid Ascharite/Reduced Graphene Oxide with Polysulfide Adsorption Host for Advanced Lithium-Sulfur Batteries