Abstract:In this study, a novel Ge-Sn based perovskite solar cell (PSC) with the structure FTO/WS2/ FA0.75MA0.25Sn0.95Ge0.05I3/MoO3/Ag has been designed and thoroughly analyzed employing SCAPS-1D. Drawing attention from the work of Ito et al., where a similar perovskite-based PSC displayed a poor performance of ~ 4.48 % PCE, in which a large conduction band offset (CBO) acts as a critical factor contributing to interfacial recombination and device deterioration. To address this issue, we presented WS2 as an electron transport layer (ETL) along with MoO3 as a hole transport layer (HTL), both possessing compatible CBO and valence band offset (VBO) with perovskite material. Through systematic simulations and optimizations, remarkable improvements in the PSC's performance have been acquired, getting a power conversion efficiency (PCE) of 18.97%. The optimized structure involved a 50 nm MoO3 HTL, 350 nm FA0.75MA0.25Sn0.95Ge0.05I3 light-harvesting layer (LHL), and a 50 nm WS2 ETL. Bulk defect densities for the LHL and ETL were optimized to 1×1015 cm-3 and 1×1018 cm-3, respectively, significantly superior values than that of reported value in the literature. Particularly, the tolerable defect density of ETL has increased 1000 times than published literature. The interfacial tolerable trap density for MoO3/perovskite increased from 1×1014 cm-2 to 1×1016 cm-2. The study also explored the impact of defects on quantum efficiency, revealing a severe negative influence beyond a perovskite bulk defect density of 1×1017 cm-3. Light intensity analysis demonstrated a correlation between incident light reduction and device performance decay. Capacitance–Voltage (C-V) and Mott-Schottky (M-S) have been analyzed during the study. Finally, the total recombination of the optimized device concerning thickness has been analyzed along with the dark J-V characteristics. The comprehensive insights gained from this work are anticipated to accelerate the fabrication of mixed Ge-Sn based PSCs with improved efficiency, paving the way for commercialization in the photovoltaic industry.

All Germanium-Based Double Absorption Layer Perovskite Solar Cell Based on SCAPS-1D Analysis

Design and numerical investigation of CsPbI3/CsSn0.5Ge0.5I3 double‐absorption‐layer heterojunction perovskite solar cells based on SCAPS‐1D

A Novel Perovskite Solar Cell Comprising CsPbI2Br/Cs2SnI6 (CsGeI3) Cascade Absorbing Bilayer and Cr2O3 Electron Transport Material: A Theoretical Comparison Study

Design and optimization study of all inorganic based double-absorption- layer CsPbI3/MoS 2 heterojunction perovskite solar cells by SCAPS-1D

Design of high efficiency perovskite solar cells based on inorganic and organic undoped double hole layer

Theoretical analysis of all-inorganic solar cells based on numerical simulation of CsGeI3/CsPbI3 with p-p+ built-in electric field

Revealing the High-Performance of a Novel Ge-Sn-Based Perovskite Solar Cell by Employing SCAPS-1D

Improving the perovskite solar cell by insertion of methyl ammonium tin oxide and cesium tin chloride as absorber layers: scaps 1d study based on experimental studies

Performance Optimization of MA0.5FA0.5PbI3/CsPbI3 Based Hybrid Perovskite Solar Cell emphasizing on Double Absorber Layer

Study and Optimization of a New Perovskite Solar Cell Structure Based on the Two Absorber Materials Cs2TiBr6 and MASnBr3 Using SCAPS 1D

Designing and Optimizing the Lead-Free Double Perovskite Cs2AgBiI6/Cs2AgBiBr6 Bilayer Perovskite Solar Cell

Design and Simulation of a Triple Absorber Layer Perovskite Solar Cell for High Conversion Efficiency

Enhancing the Efficiency of Non Toxic Perovskite Solar Cell through Cs4CuSb2Cl12 as Interface Layer Using SCAPS-1D

Modeling and numerical simulation of high efficiency perovskite solar cell with three active layers

Optimization of all inorganic perovskite solar cell with dual active layers for beyond 29% efficiency

Highly Efficient (>36%) Lead-Free Cs2BiAgI6/CIGS Based Double Perovskite Solar Cell (DPSC) With Dual-Graded Light Absorber Layers for Next Generation Photovoltaic (PV) Technologies

Lead-free, formamidinium germanium-antimony halide (FA4GeSbCl12) double perovskite solar cells: the effects of band offsets

Strategic integration of electron transport layer for high-performance optimized lead-free double perovskite solar cells with temperature dependence

CsPbI3 Based All‐Inorganic Perovskite Solar Cells: Further Performance Enhancement of the Electron Transport Layer‐Free Structure from Device Simulation

The properties of perovskite solar cells with novel MAPbBr(3)/CsPbBr3 double absorber

The Properties of Perovskite Solar Cells with Novel MAPbBr3/CsPbBr3 Double Absorber