Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Recently, the advantages of perovskite solar cells (PSCs) and a significant increase in power conversion efficiency (PCE) have played an essential role in the preference for these materials. Although different methods are used to increase PCE and reduce losses at the interfaces in PSCs, placing a new layer between the absorber/hole transfer layer (HTL) or between the absorber/electron transfer layer (ETL) stands out as one of the most common methods. In this study, considering stability, sustainability, mobility, and non-toxicity, Cs4CuSb2Cl12 (CCSC) perovskite quantum dots (PQDs) were preferred as the interface layer between absorber and HTL in CsPbI3 and formamidinium lead iodide (FAPI)-based PSC devices. While SnO2, Cu2O, and nickel were used as ETL, HTL, and back contact, respectively, CsPbI3 and FAPI perovskites were utilized as absorber materials separately. Simulations were conducted on Solar Cell Capacitance Simulator (SCAPS-1D) software and the current density (J) and voltage characteristics were compared. By choosing different interface layer thicknesses, different radiative recombination coefficients (RRCs), and different defect sites, the cell efficiency of the PQD interlayer solar cells were simulated. Simulations were also carried out using different series resistance (Rs) and different shunt resistance (Rsh) values to show the effect of parasitic losses on cell efficiency, and it was observed that device efficiency increased where Rs was low and Rsh was high. In addition, in FAPI-based structure, with the addition of a PQD layer between the absorber and HTL, it was observed that the short circuit current density increased from 17.6 mA/cm2 to 25.67 mA/cm2, while the cell efficiency increased by 30%. Furthermore, according to the results obtained using CsPbI3 as an absorber, adding a PQD layer between CsPbI3 and HTL increased the short circuit current density from 17.8 mA/cm2 to 20.7 mA/cm2 and cell efficiency by 16%. To sum up, these simulation results demonstrate that inserting a PQD layer between the absorber and HTL significantly enhances the efficiency and charge carrier capacity of solar cells.

Enhancing the Efficiency of Non Toxic Perovskite Solar Cell through Cs4CuSb2Cl12 as Interface Layer Using SCAPS-1D

Increasing the efficiency of perovskite solar cells using Cs4CuSb2Cl12 quantum dots as an interface layer: A numerical study

Improved performance of inorganic CsPbI 3 perovskite solar cells with WO 3 /C60 UTL bilayer as an ETL structure: a computational study

CsPbI3-Perovskite Quantum Dot Solar Cells: Unlocking Their Potential through Improved Absorber Layer Characteristics and Reduced Defects

Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: A numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

Design and numerical investigation of CsPbI3/CsSn0.5Ge0.5I3 double‐absorption‐layer heterojunction perovskite solar cells based on SCAPS‐1D

Numerical simulation and performance optimization of a lead-free inorganic perovskite solar cell using SCAPS-1D

Enhancing CsSn0.5Ge0.5I3 Perovskite Solar Cell Performance via Cu2O Hole Transport Layer Integration

Exploring various Integration Methods of carbon quantum dots in CsPbCl3 perovskite solar cells for enhanced power conversion efficiency

A Novel Perovskite Solar Cell Comprising CsPbI2Br/Cs2SnI6 (CsGeI3) Cascade Absorbing Bilayer and Cr2O3 Electron Transport Material: A Theoretical Comparison Study

Improving the perovskite solar cell by insertion of methyl ammonium tin oxide and cesium tin chloride as absorber layers: scaps 1d study based on experimental studies

Design and optimization study of all inorganic based double-absorption- layer CsPbI3/MoS 2 heterojunction perovskite solar cells by SCAPS-1D

Strategic integration of electron transport layer for high-performance optimized lead-free double perovskite solar cells with temperature dependence

Revealing the High-Performance of a Novel Ge-Sn-Based Perovskite Solar Cell by Employing SCAPS-1D

A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu2FeSnS4 as charge transport layers

Optimizing the Efficiency and Stability of CsSnCl3-based Perovskite Solar Cells using SCAPS Simulation Tool

Performance improvement of perovskite/CIGS tandem solar cell using barium stannate charge transport layer and achieving PCE of 39 % numerically

Numerical simulation and optimization of CsPbI3-based perovskite solar cell to enhance the power conversion efficiency

Interface engineering and defect passivation for enhanced hole extraction, ion migration, and optimal charge dynamics in both lead-based and lead-free perovskite solar cells

Performance Impact of Lead‐Free CsSn0.5Ge0.5I3 Based Perovskite Solar Cells with HTL‐Free Incorporation