Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain
Xin Li,Zhiqin Ying,Jingming Zheng,Xinlong Wang,Ying Chen,Ming Wu,Chuanxiao Xiao,Jingsong Sun,Chunhui Shou,Zhenhai Yang,Yuheng Zeng,Xi Yang,Jichun Ye
DOI: https://doi.org/10.1002/adma.202211962
IF: 29.4
2023-04-22
Advanced Materials
Abstract:Despite the swift rise in power conversion efficiency (PCE) to more than 32%, the instability of perovskite/silicon tandem solar cells is still one of the key obstacles to practical application and is closely related to the residual strain of perovskite films. Herein, a simple surface reconstruction strategy is developed to achieve a global incorporation of butylammonium cations at both surface and bulk grain boundaries by post‐treating perovskite films with a mixture of N, N‐dimethylformamide and n‐butylammonium iodide in isopropanol solvent, enabling strain‐free perovskite films with simultaneously reduced defect density, suppressed ion migration and improved energy level alignment. As a result, the corresponding single‐junction perovskite solar cells yield a champion PCE of 21.8%, while maintaining 100% and 81% of their initial PCEs without encapsulation after storage for over 2500 h in N2 and 1800 h in air, respectively. Remarkably, we further demonstrate a certified stabilized PCE of 29.0% for the monolithic perovskite/silicon tandems based on tunnel oxide passivated contacts. The unencapsulated tandem device retains 86.6% of its initial performance after 306 hours at maximum power point (MPP) tracking under continuous xenon‐lamp illumination without filtering ultraviolet (in air, 20–35 °C, 25–75%RH, most often ∼60%RH). This article is protected by copyright. All rights reserved
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology