Abstract:Research on water quenched silicomanganese slag (WQSMS) has primarily focused on grinding it into micro-powder to be used as auxiliary cementitious materials or to synthesize alkali-activated cementitious materials. However, there is a lack of research on utilizing WQSMS as fine aggregates instead of natural aggregates. Although its properties are similar to granulated blast furnace slag (GBFS), most studies investigating the use of GBFS as fine aggregates have mainly focused on mechanical properties rather than microstructure analyses. Meanwhile, to make full use of industrial solid waste, reduce CO2 emissions, and save energy consumption, solid waste cementitious material based on steel slag (SS), desulphurized gypsum (DG), and GBFS, as well as WQSMS as fine aggregate to replace ISO standard sand and washed-out sand (WOS) in various proportions(0%, 25%, 50%, 75%, and 100%) to prepare mortar and concrete, respectively. Analyses of workability, mechanical properties, and microstructure were carried out, and the improvement of mechanical properties of WQSMS was analyzed by SEM-EDS, SEM-BSE, and the microhardness test. The results show that with the increase of WQSMS, the workability of mortar and concrete decreased, while the mechanical strength increased first and then decreased. The mechanical strengths of them reached the peak when the WQSMS addition reached 50%. The flexural and compressive strengths of the mortar increased by 40% and 9.7%, respectively, while the tensile splitting strength and compressive strength of the concrete increased by 11.9% and 3.4%, respectively. The microstructure of the interfacial transition zone(ITZ) was greatly enhanced by WQSMS, which decreased the porosity by 10.49%, decreased the thickness by 27.27%, and increased the microhardness by 11.0%. However, when the content surpasses 50%, the mechanical strength of mortar and concrete declined due to the loose porosity and poor mechanical strength of WQSMS, and there was insufficient cementitious material to fill these holes. Nonetheless, with 100% content, the mortar maintained its high-performance status, with a flexural strength of 8.0 MPa and a compressive strength of 47.9 MPa, and the concrete still fulfilled the specifications of regular concrete C40. Both the fine aggregate and the cementitious material were composed of solid waste, showing potential environmental benefits and interesting green products for future studies.

Recycling of Waste Glass Powder: Effects on Microstructure, Mechanical Properties and Sustainability of Seashell Powder Calcined Sludge Cement

Reusing Waste Glass Powder to Improve the Strength Stability of Cement at HTHP

Enhancing the Corrosion Resistance of Recycled Aggregate Concrete by Incorporating Waste Glass Powder

A versatile double aberration-corrected, energy filtered HREM/STEM for materials science.

Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures

Effective Utilization of Waste Glass as Cementitious Powder and Construction Sand in Mortar

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Assessing the modification efficiency of waste glass powder in hydraulic construction materials

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Sustainable Utilization of Waste Oyster Shell Powders with Different Fineness Levels in a Ternary Supplementary Cementitious Material System

Microscopic Mechanism and Reagent Activation of Waste Glass Powder for Solidifying Soil

The reuse of waste glass to enhance strength during the introduction of municipal sewage sludge in shale brick manufacturing

Recycled glass powder for enhanced sustainability of limestone calcined clay cement (LC3) mixtures: mechanical properties, hydration, and microstructural analysis

Molecular characterization of parthenogenic Fasciola sp. in Korea on the basis of DNA sequences of ribosomal ITS1 and mitochondrial NDI gene.

Effect of Waste Glass on Slurry Rheological Properties of Cement and Concrete

Mechanical and durability assessments of steel slag-seashell powder-based geopolymer concrete

Mechanical properties and microscopic mechanism of solid waste based binder solidified stone waste

Effect of water quenched silicomanganese slag as fine aggregate on mechanical properties and microstructure characteristics of solid waste-based mortar and concrete

Study on preparation and activation enhancement effect of cold bonded multi-solid waste wrap-shell lightweight aggregates (SWSLAs) with low cement content

Studying the Effects of Varied Dosages and Grinding Times on the Mechanical Properties of Mortar

Resource utilization of solid waste from steel industries in cement-based cementitious materials: Mechanical properties, hydration behaviors, and environmental impact