Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Compliant Curved Beam Support with Flexible Stiffness Modulation for Near-Zero Frequency Vibration Isolation

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

A Straight-Arch-straight Beam Tandem Quasi-Zero Stiffness Structure

A Quasi-Zero Stiffness Mechanism with Monolithic Flexible Beams for Low-Frequency Vibration Isolation

Modular quasi-zero-stiffness isolator based on compliant constant-force mechanisms for low-frequency vibration isolation

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Linear and Nonlinear Stiffness Compensation for Low-Frequency Vibration Isolation: a Comparative Study

Ultra-Low frequency vibration isolation of a novel click-beetle-inspired structure with large quasi-zero stiffness region

Compliant quasi-zero-stiffness isolator for low-frequency torsional vibration isolation

Nonlinear compensation method for quasi-zero stiffness vibration isolation

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

Characteristics of a Quasi-Zero-Stiffness Isolator Using a Double-Curved Beam As a Negative Stiffness Mechanism

Design of broad quasi-zero stiffness platform metamaterials for vibration isolation

Research on flexible beam-type nonlinear vibration isolators suitable for low frequencies

Sliding-boundary-constrained cantilever structure for vibration isolation via nonlinear stiffness modulation

Design and Vibration Isolation Investigation of a Load-Adjustable Quasi-Zero Stiffness Isolator

Generative Quasi-Zero Stiffness Paradigm for Vibration Isolation by Constraining the Constant Force with Hardening Boundaries

An innovative design of parabolic cam-roller quasi-zero-stiffness isolators for ultralow frequency vibration isolation

Inverse-designed metastructures with customizable low dynamic stiffness characteristics for low-frequency vibration isolation

Excellent vibration isolation properties of a curved Euler beam QZS isolator: Simulation and experiment

Light-weighted quasi-zero stiffness device based on connected inclined beams on a flexible support