Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Compliant quasi-zero-stiffness isolator for low-frequency torsional vibration isolation

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

A torsion–translational vibration isolator with quasi-zero stiffness

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Modular quasi-zero-stiffness isolator based on compliant constant-force mechanisms for low-frequency vibration isolation

A Straight-Arch-straight Beam Tandem Quasi-Zero Stiffness Structure

An innovative design of parabolic cam-roller quasi-zero-stiffness isolators for ultralow frequency vibration isolation

Design and modeling of a quasi-zero stiffness isolator for different loads

Design and experimental study of a two-stage nonlinear vibration isolators with quasi-zero stiffness

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Design and Vibration Isolation Investigation of a Load-Adjustable Quasi-Zero Stiffness Isolator

An asymmetric quasi-zero stiffness vibration isolator with long stroke and large bearing capacity

Modeling, analysis, and simulation of X-shape quasi-zero-stiffness-roller vibration isolators

Modeling and analysis of a torsional magnetic negative stiffness structure for flexible vertical low-frequency vibration isolation

A novel integrated quasi-zero stiffness vibration isolator for coupled translational and rotational vibrations

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

Design of a new quasi-zero-stiffness isolator system with nonlinear positive stiffness configuration and its novel features

Integrated Design of Quasi-Zero-Stiffness Vibration Isolators Based on Bifurcation Theory

Origami-Inspired Isolators with Quasi-Zero Stiffness for Coupled Axial-Torsional Vibration