Abstract:Squeezing problems pose a serious challenge for tunnel engineers because they can slow down a project, increase the project budget, and potentially lead to catastrophic collapse. The choice of an adequate support is also often difficult owing to complex geological environments. Lack of sufficient understanding of geological conditions such as high geostress and horizontal layered rock mass could cause tunnel collapse and further lead to economic loss and endanger human life. In an attempt to deal with in-situ squeezing problem, this paper focus on the investigation of the mechanical behavior of tunneling in horizontal layered rock mass with high geostress and the proposal of proper engineering measures. A tunnel collapse incident occurred in northeastern China is analyzed using comprehensive methods including photographing, laboratory tests, discrete element numerical simulations, and site monitoring. The discrete element method was applied to investigate the tunneling mechanical behavior under high-geostress conditions in a horizontally layered rock mass. Numerical simulations show that the dominant horizontal stress and joints cause the maximum deformation at the corner of the arch region. The effect of horizontal joints and horizontal dominant stress were analyzed and found to be the main causes of the collapse. Based on the simulation results, an innovative, simple and efficient tangential yielding element is developed and implemented to test its applicability in a tunnel engineering scenario. Load-displacement curves of the tangential yielding element were obtained through laboratory tests and introduced to the numerical model using the 3D discrete element method. The performance of the developed tangential yielding element was validated in the simulation. Site monitoring was also conducted to determine the in-situ performance of the yielding support using the tangential yielding element. The monitored settlement at the crown region is in agreement with the simulation. The in-situ tests show that the yielding element was considerably deformed while the tunnel remained stable, which confirms the applicability of this technique. The effectiveness of the yielding element is also confirmed in terms of a comparative cost analysis of the yielding and resistant support schemes.

Effect of Lateral Pressure on the Stability of Inclined Layered Rock Tunnel: A 3D-Printed Model Investigation by Cement-based Materials

Physical Model Test and Application of 3D Printing Rock-Like Specimens to Laminated Rock Tunnels

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical Analysis of the Influence of Tunneling on Ground Movement and Adjacent Frame Structure

Influences of foliation orientation and lateral stress difference on the deformation and fracturing of a thin-layered rock around underground excavations: insight from multi-axial loading tests

Effect of horizontal stress on the mesoscopic deformation and failure mechanism of layered surrounding rock masses in tunnels

Experimental Study on the Effect of Single Structural Plane on the Stability of Shallow Tunnel Surrounding Rock

Research on the large deformation mechanism and control measures of a layered soft rock tunnel

Stress-induced collapse in horizontally layered rock and a yielding support strategy: A case study

An Experimental Investigation on the Foliation Strike-Angle Effect of Layered Hard Rock under Engineering Triaxial Stress Path

Failure behaviors of square-tunnel-structured rock specimens under various inclined boundary stress conditions

Dynamic response characteristics and instability mechanism of layered surrounding rock tunnels affected by geostress under dynamic and static loads

Geomechanical Model Experiment Study on Deformation and Failure Mechanism of the Mountain Tunnel in Layered Jointed Rock Mass

Model test and discrete element method simulation of tunnel face stability in sand-gravel inclined layered stratum

Experimental Investigation of Laws during Deformation of Circular Roadway in 10° Inclined Layered Rock

Influence of Tunnel Excavation on the Stability of a Bedded Rock Slope: A Case Study on the Mountainous Area in Southern Anhui, China

Three-dimensional stability analysis of a longitudinally inclined shallow tunnel face

Physical Model Study on Brittle Failure of Pressurized Deep Tunnel with Support System

Physical modelling of deformation and failure mechanisms and supporting effects for a deep-buried tunnel in inclined layered strata

An analytical model for predicting the mechanical behavior of a deep lined circular pressure tunnel by using complex variable method

Modeling of the Effect of Excavation Mode on the Extent of the Anisotropic Zone Surrounding Deep Tunnels