Centrifuge Model Tests of H Type Anti-Slide Pile Reinforced Soil-Rock Mixture Slope

Hao Zhang,Haofeng Xing,Lei Zhu,Xiaopeng Guo,Wanxue Long,Tongda Guo

DOI: https://doi.org/10.1007/978-981-99-9069-6_26

2024-01-01

Abstract:Stability issues and the resulting economic and human losses associated with soil-rock mixture slopes (SRMS) are significant concerns. To address these stability problems in SRMS, h-type anti-slide piles (hTP) have been recognized as reliable stabilizing structures. This research involves a series of five centrifuge model tests conducted to investigate the stress response of hTPs under various pile parameter scenarios. The experiments were designed to evaluate the impact of variables such as pile spacing, anchoring depth, and beam rigidity, leading to practical recommendations for the effective use of hTPs. Centrifuge tests unveiled that the rear pile undergoes an M-shaped bending moment distribution, marked by three crucial inflection points situated approximately at 1/4 h(2),4/7 h(2), and 5/6 h(2). In contrast, the front pile exhibits a V-shaped bending moment distribution, reaching its peak at a depth of 6/7 h(1). The alteration of the bending moment throughout the loading phases is divided into three distinct periods: the slow creep stage, the slow growth stage, and the rapid growth stage. Moreover, it was noted that the bending moment of hTP intensifies with an increase in pile spacing, while the depth of anchoring shows no significant influence on the magnitude of the bending moment.