Abstract:Previous studies on laterally loaded piles in clay have mainly focused on flexible and rigid piles. Little attention has been paid to semi-rigid piles (whose pile–soil stiffness lies somewhere between those of rigid and flexible piles), which may behave as either flexible piles or rigid piles, depending on the change in soil stiffness during cycling. This study aims to understand the cyclic lateral response of a repeatedly loaded semi-rigid pile in soft clay and the failure mechanisms of the soil around the pile, through a series of centrifuge model tests and three-dimensional finite element analyses using an advanced hypoplastic clay model. Numerical parametric studies were also performed to investigate the evolution of soil flow mechanisms with increasing pile rigidity. It is revealed that the semi-rigid pile behaved as if it were a flexible pile (i.e., flexural deformation dominated) during the first few cycles, but tended to behave like a rigid pile (i.e., rotational movement prevailed) during subsequent cycles, which progressively softened the surrounding soil. As a result, the mechanisms of soil flow around the semi-rigid pile exhibited an intermediate behaviour combining the mechanisms of both flexible and rigid piles. Three distinctive mechanisms were identified: a wedge-type mechanism near the surface, a full-flow mechanism (within the transverse sections) near the middle of the pile, and a rotational soil flow mechanism (in the vertical symmetrical plane of the pile) near the lower half of the pile. By ignoring the rotational soil flow mechanism, which has a much lower resistance than the full-flow mechanism, the American Petroleum Institute code (published in 2007) underestimated the cyclic bending moment and the lateral pile displacement by 10% and 69%, respectively. Application of jet grouting around the semi-rigid pile at shallow depth significantly altered the soil flow mechanism (i.e., it was a solely wedge-type mechanism around the grouted zone).

Design of Model Concrete Piles to Reinforced Slopes for Dynamic Centrifuge Tests

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Centrifuge Modeling of Static and Dynamic Failure of Stabilizing Piles in Slope

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Centrifuge modeling of cohesive soil slopes reinforced by stabilizing piles

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Experimental Study on Dynamic-Elastic Response of Model Concrete Stabilizing Pries During Earthquake

Centrifuge Model Test Study on Pile Reinforcement Behavior of Cohesive Soil Slopes under Earthquake Conditions

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Centrifuge Modeling of Dynamic Behavior of Pile-Reinforced Slopes During Earthquakes

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Dynamic centrifuge test Of slope reinforced with copper model piles

Dynamic Centrifuge Modeling of Piles-Reinforced Slope on Saturated Sandy Foundation

Study on Characteristics of Dynamic Failure of Stabilizing Piles in Slope on Liquefiable Soil Foundation

Centrifuge Study on Behavior of Rigid Pile Composite Foundation under Embankment in Soft Soil

Cyclic Lateral Response and Failure Mechanisms of Semi-Rigid Pile in Soft Clay: Centrifuge Tests and Numerical Modelling

Pile Reinforcement Mechanism of Soil Slopes

Behavior of Soil Slopes Reinforced with Composite-Structural Piles