Abstract:This study investigates the preparation of ultrahigh-strength AZ80 magnesium alloy bulks using room temperature multidirectional forging (MDF) at different strain rates. The focus is on elucidating the effects of multidirectional loading and strain rates on grain refinement and the subsequent impact on the mechanical properties of the AZ80 alloy. Unlike hot deformation, the alloy subjected to room temperature MDF exhibits a lamellar twinned structure with multi-scale interactions. The key to achieving effective room temperature MDF of the alloy lies in combining multidirectional loading with small forging strains per pass (6%). This approach not only maximizes the activation of twinning to accommodate deformation but ensures sufficient grain refinement. Microstructural analysis reveals that the evolution of the grain structure in the alloy during deformation results from the competition between {101 ̄2} twinning or twinning variant interactions and detwinning. Increasing the forging rate effectively activates more twin variants, and additional deformation passes significantly enhance twin interaction levels and dislocation density. Furthermore, at a higher strain rate, more pronounced dislocation accumulation facilitates the transformation of twin structures into high-angle grain boundaries, promoting texture dispersion and suppressing detwinning. The primary strengthening mechanisms in room temperature MDF samples are grain refinement and dislocation strengthening. While increased dislocation density raises yield strength, it reduces post-yield work hardening capacity. After two passes of MDF at a higher strain rate, the alloy achieves an optimal balance of strength and ductility, with a tensile strength of 462 MPa and an elongation of 5.1%, significantly outperforming hot-deformed magnesium alloys.

Effect of Holding Time on Improving the Microstructure and Mechanical Properties of Die-Forged Az80-Ce Magnesium Alloys

Effect of Holding Time on Microstructure and Properties of Magnesium Alloy

Effect of multiple forging process on micro-structure and mechanical properties of magnesium alloy AZ80

Microstructure evolution and mechanical anisotropy of AZ80-Ag magnesium alloy: Effect of isothermal semi-closed die forging and subsequent aging

Effects of optimizing continuous forging extrusion process on the microstructure and mechanical properties of AZ31 magnesium alloy

Microstructure and Properties of AZ91D Magnesium Alloy in Combination Process of Die Casting with Forging

Microstructure Evolution and Deformation Mechanism of AZ80 Alloy During Die Forging

An innovative thermal simulation study of microstructure improvement by delay forging during solidification

Effect of Forging and Heat Treatment on Microstructure and Mechanical Properties of Mg-8.5Gd-3.2Y-0.4Zr Alloy

Simultaneously improving the deformation tolerance and mechanical properties of AZ80 magnesium alloy through the combination of pre-cryogenic and Multi-directional forging

Effects of Forging and Rolling Process on Microstructure and Mechanical Properties of Wrought Magnesium Alloy AZ31

Influence of Fire Times on the Microstructure and Mechanical Properties of Forgings with Complex Shape

Effect of Cold Forging and Static Recrystallization on Microstructure and Mechanical Property of Magnesium Alloy AZ31

Microstructure evolution of az80 magnesium alloy during multi-directional forging process

Uncovering the influence of deformation amount on microstructure evolution and mechanical behavior of the multi-DoF formed WE43 magnesium alloy

Microstructural Evolution and Mechanical Properties of Extruded AZ80 Magnesium Alloy during Room Temperature Multidirectional Forging Based on Twin Deformation Mode

Effect of Hot Forging Process Parameters and Ce Addition on the Microstructure and Mechanical Properties of an As‐Forged AZ80 Alloy

Effect of Heat Treatment on the Microstructure and Mechanical Properties of a Multidirectionally Forged Mg-Gd-Y-Zn-Zr-Ag Alloy

Microstructures and Mechanical Properties of Az91 Magnesium Alloy Processed by Multidirectional Forging under Decreasing Temperature Conditions

Study on isothermal precision forging process of rare earth intensifying magnesium alloy

Effect of Magnesium on the Carbide and Thermoplasticity of Cold Working Die Steel