Abstract:A NASICON-type electrolyte was considered to be one of the most promising electrolytes for solid-state Na metal batteries. However, its lower ion conductivity compared to a liquid electrolyte and the formation of Na dendrites hinder its practical application. Herein, NASICON-type (Na3Zr2Si2PO12) solid-state electrolytes with developed ionic conductivity and declined electronic conductivity were synthesized through the rare earth oxide-assisted sintering method, such as Sm2O3 and Ho2O3. With the presence of Sm2O3 and Ho2O3 during sintering, the formed phosphate grain boundary phase adjusts the Si/P ratio in the NASICON structure with higher Na+ occupancy and then enhances the ionic conductivity of electrolytes. On the other hand, the formed phosphate grain boundary phase with low electronic conductivity prevents the movement of electrons at the grain boundary, reducing the probability that electrons combine with Na+ at the grain boundary to form Na-0, thereby restricting the formation of dendrites along grain boundaries. In addition, the added Sm2O3 and Ho2O3 play the role of fluxing agents to increase the densification of ceramics, further enabling the enhancement of ionic conductivity and restriction of dendrites in the voids. As a result, the obtained NZSP-0.2Sm and NZSP-0.3Ho electrolytes deliver critical current density (CCD) values of 0.85 and 0.65 mA cm(-2), respectively, at room temperature. Application of the obtained electrolytes in Na metal batteries is evaluated by assembling Na3V2(PO4)(3)vertical bar NZSP-0.2Sm/0.3Ho vertical bar Na cells, which deliver high discharge capacity values of 102.6 and 101.8 mAh g(-1) at 0.5 C after 100 cycles with capacity retention ratios of 98.3 and 98.6%, respectively. The presented results indicated that rare earth oxideassisted sintering is an effective route to improve the ionic conductivity and restrict dendrite formation for oxide ceramic solid-state electrolytes.

Doping Enhanced Charge Transportation in NASICONs for Energy Storage

Towards Polyvalent Ion Batteries: A Zinc-Ion Battery Based on NASICON Structured Na3V2(PO4)3

Enhanced ionic conductivity in Na3Zr2Si2PO12 NASICON-type solid electrolytes by adding Mg2+-ions

Enhancing Na-ion conducting capacity of NASICON ceramic electrolyte Na3.4Zr2Si2.4P0.6O12 by NaF sintering aid

Al Doped into Si/P Sites of Na 3 Zr 2 Si 2 PO 12 with Conducted Na 3 PO 4 Impurities for Enhanced Ionic Conductivity

Unraveling the Fast Ionic Conduction in NASICON‐Type Materials

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Understanding crystal structures, ion diffusion mechanisms and sodium storage behaviors of NASICON materials

Zn-doping Effects of Na-rich Na3+xV2-xZnx(PO4)3/C Cathodes for Na-Ion Batteries: Lattice Distortion Induced by Doping Site and Enhanced Electrochemical Performance

Doping‐Induced Electronic/Ionic Engineering to Optimize the Redox Kinetics for Potassium Storage: A Case Study of Ni‐Doped CoSe2

Activating a Multielectron Reaction of NASICON-Structured Cathodes toward High Energy Density for Sodium-Ion Batteries.

Effective Resistance to Dendrite Growth of NASICON Solid Electrolyte with Lower Electronic Conductivity

Improving the ionic conductivity of NASICON through aliovalent cation substitution of Na3Zr2Si2PO12

Doping Strategies to Enhance the Na+ Conductivity of the Cubic Na3PS4 Superionic Conductor

Challenges and Perspectives for NASICON-Type Electrode Materials for Advanced Sodium-Ion Batteries

Identifying Migration Channels and Bottlenecks in Monoclinic NASICON‐Type Solid Electrolytes with Hierarchical Ion‐Transport Algorithms

The recent advances of NASICON-Na3V2(PO4)3 cathode materials for sodium-ion batteries

Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Composite NASICON (Na3Zr2Si2PO12) Solid-State Electrolyte with Enhanced Na+ Ionic Conductivity: Effect of Liquid Phase Sintering