Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

Growth Characteristic and Fracture Toughness of Laser Rapidly Solidified Al2O3/YAG/ZrO2 Ceramic Eutectic in Situ Composite

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Microstructure and mechanical properties of ZrB2-SiC eutectic composite ceramic fabricated by laser surface zone-melting: The effect of laser power and scanning speed

Microstructural Characterization of Nanostructured Al2O3-ZrO2 Eutectic Layer by Laser Rapid Solidification Method

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

High Temperature Deformation of Non-Directionally Solidified Al2O3/YAG/ZrO2 Eutectic Bulk Ceramic

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition

Rapid Fabrication of Bulk Graded Al2o3/Yag/Ysz Eutectics by Combustion Synthesis under Ultra-High-Gravity Field

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Microstructure and mechanical properties of ZrO2 fiber toughened Al2O3/ZrO2(Y2O3) solidified ceramics prepared with high frequency induction zone melting

Crucible-free Fabrication of ZrB2–SiC Composite Ceramics with Ultra-Fine Eutectic Microstructure by Laser Surface Zone-Melting: the Selection of Lasers

Insights into high thermal stability of laser additively manufactured Al2O3/GdAlO3/ZrO2 eutectic ceramics under high temperatures

Seed-crystal-induced directional solidification toward Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12/ZrO2 ternary eutectic ceramics

Nanocrystalline Alumina-Zirconia-Based Eutectic Ceramics Fabricated with High-Energy Beams: Principle, Solidification Techniques, Microstructure and Mechanical Properties

Effect of laser focus shift on the forming quality, microstructure and mechanical properties of additively manufactured Al2O3–ZrO2 eutectic ceramics

Microstructure and mechanical properties of eutectic composite ceramic Al2O3/ZrO2 by explosion synthesis

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic