Abstract:Circulation control (CC) is an airfoil lift augmentation technique that replaces mechanical structures by means of aerodynamic flaps generated by high-speed jets. In view of the high air consumption for the conventional steady jet to drive the circulation control wing (CCW), the emerging sweeping jet is proposed herein as an alternative excitation method and compared with continuous and discrete steady jets. Four dimensionless parameters characterizing the jet blowing intensity are used to comprehensively evaluate the lift augmentation capacity of the three types of jet. In terms of the velocity ratio and the momentum coefficient, the continuous steady jet is the most efficient to enhance the lift. On the other hand, with respect to the mass flow coefficient, the sweeping jet can reduce the air consumption by 48% compared to the continuous steady jet. Therefore, in the light of this contradiction, a more comprehensive indicator, namely, the energy coefficient, is used to quantify the energy expenditure. The accordingly plotted curves of the lift coefficient versus the energy coefficient for continuous steady jets and sweeping jets almost overlap each other, which indicates that the sweeping jets reduce the air consumption by virtue of higher jet velocities at the expense of higher pressure loss. Besides, compared to the discrete steady jets with the same jet spacing, the sweeping jets boast a notably higher lift generation performance, verifying that the unsteady lateral oscillation of the sweeping jet is also critical to the lift augmentation. Then, a new index, namely, the energy coefficient-based lift augmentation ratio, is proposed as the indicator to quantitatively compare the lift augmentation efficiencies of the CCWs driven by different jet actuators. The sweeping jet is proved to have a lift augmentation efficiency that is not at all inferior to that of the traditional steady slot jet.

Learning Active Flow Control Strategies of a Swept Wing by Intelligent Wind Tunnel

Aerodynamic Optimization of a Transonic Fan Rotor by Blade Sweeping Using Adaptive Gaussian Process

Lift Augmentation Potential of the Circulation Control Wing Driven by Sweeping Jets

Adaptive Sliding Mode Control with Transition Process for Flapping Wing Aerial Vehicle

Wind-Tunnel-in-the-Loop Exploration and Optimization of Active Flow Control Parameters

Transferable Machine Learning Model for the Aerodynamic Prediction of Swept Wings

Mechanism Analysis of Hysteretic Aerodynamic Characteristics on Variable-Sweep Wings

Numerical Analysis Of Active Flow Control Around Airfoil By Synthetic Jet Technology In Low Reynolds Number

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

An Exploration of Flow Control Using Machine Learning and Computational Fluid Dynamics

Flow Control with Synthetic Jets on two Tandem Airfoils Using Machine Learning

A combined experimental and numerical study on aerodynamic load reduction for a swept wing by using jets

Wing design optimization and stall analysis with Co-flow Jet active control

From Active Learning to Deep Reinforcement Learning: Intelligent Active Flow Control in Suppressing Vortex-Induced Vibration

Numerical Investigation of Active Flow Control on a Pitching NACA 0015 Airfoil Using Detached-eddy Simulation

Study of transfer learning from 2D supercritical airfoils to 3D transonic swept wings

Detached-Eddy Simulations for Active Flow Control

Active Learning of Tandem Flapping Wings at Optimizing Propulsion Performance

Active control of the flow past a circular cylinder using online dynamic mode decomposition

Flow separation control design with experimental validation

Closed-loop Flow Control Method Based on Deep Reinforcement Learning using a Co-flow Jet