Abstract:This study presents an adaptive algorithm for distance relays. In this algorithm, the network connected to the transmission line terminals are modelled using an equivalent circuit, and the impedances of this equivalent circuit are estimated. By employing this algorithm, relay errors (over/under reach) caused by changes in network structure, the presence of fault resistance, and injected current from the remote end of the transmission line are eliminated. As a result, the relay accurately determines fault location and fault resistance, enhancing the performance of its Zone1 and Zone2 functions. Faults in power systems occur for various reasons, such as aging or natural disasters. Detecting, locating, and promptly clearing these faults is crucial for maintaining the safety and reliability of transmission lines (TLs). Distance relays (DRs), which protect TLs, detect faults, estimate their location, and send the required commands. However, these relays may experience mis‐detection due to manipulated impedance arising from both internal and external factors. These factors include measurement device errors, network topology changes, the presence of fault resistance (FR), and injected currents from remote line terminals. To address this challenge, an innovative adaptive protection scheme that considers FR, changes in network topology, and injected current from the opposite end of the line is proposed. By estimating the equivalent circuit impedances (ECIs) of the network connected to the terminal of the TL, this protection scheme utilizes impedance estimation techniques at the line terminals and offline network information. Simulation studies (tested on the IEEE 39‐bus standard network) show that the proposed scheme accurately estimates fault location (FL) and FR with high precision. The simulation results demonstrate its effectiveness in improving the performance of conventional distance protection relays in both the first and second protection zones (Zone1 and Zone2 ).

High-resistance Faults on a Multi-Terminal Line: Analysis, Simulated Studies and an Adaptive Distance Relaying Scheme

Adaptive Distance Relay for Preventing Error Action of Reactive Fault

New Type Adaptive Distance Relay with Improved Performance

An adaptive distance protection scheme considering fault resistance, injected current, and structural changes in the power system

Distance Relaying of Asymmetrical Double-Circuit Transmission Lines Considering Abnormal Faults

Enhancing transmission line protection with adaptive ANN-based relay for high resistance fault diagnosis

An Adaptive Reclosure Scheme for Parallel Transmission Lines with Shunt Reactors

Improved Fault Location Through Analysis of System Parameters During Autoreclose Operations on Transmission Lines

Research on a Distance Relay-Based Wide-Area Backup Protection Algorithm for Transmission Lines

Fault Location for HV Three-terminal Transmission Lines

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

A fault-component based adaptive distance protection scheme

New Fault Location Method for HV T-connection. Transmission Lines

Fault analysis of multinode power systems for designing ultra-high-speed protective relays along with a proposed relaying scheme

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

The Energy Based Directional Protection of Transmission Lines

A New Protection Scheme for High Impedance Fault Using Adaptive Trip and Reclosure Technique

An Integrated Protection Scheme Based On A Distance Approach

Traveling-wave Differential Relay Scheme for Double-circuit Parallel Lines on the Same Pole

Non-Unit Ultra-High-Speed Line Protection for Multi-Terminal Hybrid LCC/MMC HVDC System and Its Application Research

Novel location algorithm for single-line-to-ground faults in transmission line with distributed parameters