Abstract:A proton exchange membrane (PEM) fuel cell is one of the highly efficient hydrogen utilization devices. However, due to the complex physical and chemical processes in fuel cells, developing a mathematical model of the PEM fuel cell is challenging. In this study, a new coupled model based on the computational fluid dynamics method and a 1D model is proposed for the accurate and fast prediction of PEM fuel cell performance. First of all, the proposed model is validated using the literature data. It is then applied to simulate the distribution and evolution of the current density, hydrogen and oxygen mass fraction, and membrane water content in catalyst layer (CL). Results show that the increase in the current density is attributed to the increase in the consumption rate of hydrogen and oxygen and the increase in the membrane water content. In addition, the stabilized supply of the oxygen in cathode and the membrane water content in the anode CL are critical for the improvement of the fuel cell performance. For the cases studied in this research, when the output voltage decreases from 0.6 V to 0.3 V, the current density increases from 5738.1 A/m2 to 15171.2 A/m2. The average oxygen mass fraction in the cathode CL and the average membrane water content in the anode CL decreased by 42.3 % and 9.6 %, respectively. In addition, when the fuel cell starts up at 0.6 V, the concentration of hydrogen and oxygen drops gradually decreases along the flow direction of the CL, while the membrane water content rapidly increases initially, and then increases slowly, with the turning point around at approximately 2.2 x 10-3 m. Under the combined effect of hydrogen and oxygen concentration, as well as the membrane water content, the current density first increases and then decreases, with the maximum value exceeding 6500 A/m2.

Numerical Study and Prediction of Water Transport Through a PEM Fuel Cell Based on Genetic Algorithm

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Influence of Heat Transfer on Gas and Water Transport in Fuel Cells

Numerical Modeling and Performance Prediction of Water Transport for PEM Fuel Cell

Analytical Calculation and Evaluation of Water Transport Through a Proton Exchange Membrane Fuel Cell Based on a One-Dimensional Model

Numerical studies of liquid water behaviors in PEM fuel cell cathode considering transport across different porous layers

Numerical Studies of Interfacial Phenomena in Liquid Water Transport in Polymer Electrolyte Membrane Fuel Cells Using the Lattice Boltzmann Method

Numerical Study of Water Transport and Operating Strategy for Fuel Cells with Segmented Water Management Flow Fields

Numerical Simulation of Three-Dimensional Gas/liquid Two-Phase Flow in a Proton Exchange Membrane Fuel Cell

A single-phase, non-isothermal model for PEM fuel cells

A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

Analyzing Key Factors Influencing Water Transport in Open Air-Cooled PEM Fuel Cells

Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-Phase Non-Isothermal Mixed-Domain Model

A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations

Simulation of Water Transport in Proton Exchange Membrane Fuel Cell Using a One-dimension Model

Analysis of Water Management in Proton Exchange Membrane Fuel Cells

Modeling and analysis of internal water transfer behavior of PEM fuel cell of large surface area

Numerical Investigation of Water Dynamics in a Novel Wettability Gradient Anode Flow Channel for Proton Exchange Membrane Fuel Cells

Modeling and analysis of water vapor dynamics in high-temperature proton exchange membrane fuel cell coupling gas-crossover phenomena

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell