Abstract:Gibbs adsorption and Zener pinning induced by MgB2 decomposition are proven to inhibit grain growth for enhancing mechanical properties and cutting processibility of Bi2Te3‐based alloys with improved thermoelectric performance. An average figure of merit of 1.1 within 300–473 K can be obtained in (Bi0.4Sb1.6Te3)0.97(MgB2)0.03, and an energy conversion efficiency of 4.2% at a temperature difference of 215 K can be achieved in an eight‐pair device. Bi2Te3‐based alloys have great market demand in miniaturized thermoelectric (TE) devices for solid‐state refrigeration and power generation. However, their poor mechanical properties increase the fabrication cost and decrease the service durability. Here, this work reports on strengthened mechanical robustness in Bi2Te3‐based alloys due to thermodynamic Gibbs adsorption and kinetic Zener pinning at grain boundaries enabled by MgB2 decomposition. These effects result in much‐refined grain size and twofold enhancement of the compressive strength and Vickers hardness in (Bi0.5Sb1.5Te3)0.97(MgB2)0.03 compared with that of traditional powder‐metallurgy‐derived Bi0.5Sb1.5Te3. High mechanical properties enable excellent cutting machinability in the MgB2‐added samples, showing no missing corners or cracks. Moreover, adding MgB2 facilitates the simultaneous optimization of electron and phonon transport for enhancing the TE figure of merit (ZT). By further optimizing the Bi/Sb ratio, the sample (Bi0.4Sb1.6Te3)0.97(MgB2)0.03 shows a maximum ZT of ≈1.3 at 350 K and an average ZT of 1.1 within 300–473 K. As a consequence, robust TE devices with an energy conversion efficiency of 4.2% at a temperature difference of 215 K are fabricated. This work paves a new way for enhancing the machinability and durability of TE materials, which is especially promising for miniature devices.

Exceptional Thermoelectric and Mechanical Performance in (bi, Sb)2Te3 Matrix Facilitated by AgInSe2 Alloying

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

High‐Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi,Sb)2Te3 Matrix

Organic/Inorganic Hybrid Design as a Route for Promoting the Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> for High-Performance Thermoelectric Power Generation

Enhanced Thermoelectric Performance of P‐Type (Bi,Sb)2Te3 by Incorporating Non‐Stoichiometric Ag5Te3 and Refining Te‐Se Ratio

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi 0.48 Sb 1.52 Te 3 –AgSbSe 2 Composite

Improved thermoelectric and mechanical performance of Sb2Te3-based materials toward the segmented operation

High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization Strategy

High Performance Dual-mode Module for Power Generation and Cooling Based on Optimized BiSbTe

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices

Enhanced Near-Room Temperature Thermoelectric Performance and Mechanical Strength of N-Type BiTeSe Materials Incorporated with Ag2Se Inclusions

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Enhanced mechanical and thermoelectric properties enabled by hierarchical structure in medium-temperature Sb2Te3 based alloys

Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber

Defect Engineering Stabilized AgSbTe2 with High Thermoelectric Performance

Critical Role of Tellurium Self-Compensation in Enhancing the Thermoelectric Performance of P-Type Bi0.4Sb1.6Te3 Alloy

Construct Amorphous Polymer Interface to Enhance the Thermoelectric Performance of Commercial Bi0.5Sb1.5Te3 Materials

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

BiSbTe alloy with high thermoelectric and mechanical performance for power generation

Enhanced thermoelectric performance of p-type sintered BiSbTe-based composites with AgSbTe2 addition