Abstract:The most common beneficiation method for feldspar is flotation with a cationic (amine) collector under acidic conditions. However, there are several disadvantages to this, such as environmental pollution and equipment corrosion. In order to resolve such problems, it is important to study the flotation of feldspar using anionic collectors under natural pH conditions. The purpose of this paper is to study the effects and mechanism of Fe3+ on flotation separation of feldspar and epidote using sodium oleate (NaOL) at a natural pH. Through flotation experiments, adsorption measurements, zeta potential testing, FTIR analysis and X-ray photoelectron spectroscopy (XPS), the mechanism of Fe3+ on the surface of feldspar and epidote is revealed, and the reason behind the difference in flotation of the two minerals is discussed. The flotation test results show that Fe3+ can significantly improve the flotation behavior of minerals when NaOL is used as a collector under natural pH, and the highest recovery rates of feldspar and epidote are 90% and 43%, respectively. Analysis of the solution and adsorption measurement results show that Fe3+ is adsorbed on the minerals′ surface in the form of Fe(OH)3, which promotes the adsorption of NaOL on the minerals’ surface through Fe(OH)3, activating the flotation of feldspar and epidote. The difference in adsorption of Fe3+ between feldspar and epidote is the reason for this difference in flotation behavior. The results of the zeta potentials show that after being treated with Fe3+, the electrostatic adsorption of NaOL displays a significant negative shift on the surface of feldspar, while there is almost no electrostatic adsorption of NaOL on the surface of Fe3+-treated epidote. FTIR analysis confirmed that the difference in the adsorption of Fe3+ and NaOL on the surface of feldspar and epidote is due to the fact that there are more active particles (metal bonds) on the surface of feldspar than on the surface of epidote, and the properties of these metal bonds can be changed by Fe3+, which allows NaOL to be more easily adsorbed on the mineral surface through –COO−. The possible adsorption form is “mineral-Fe3+–COO−“. Compared with the infrared spectrum of epidote, there is a new absorption peak at 1713.68 cm−1, which can be attributed to the C=O characteristic peak of NaOL in the infrared spectrum of Fe3+–NaOL-treated feldspar, which is why the floatability of feldspar is better than epidote. XPS confirmed that the Fe on the surface of feldspar is Fe3+ in the form of Fe(OH)3, while Fe on the surface of epidote is mainly Fe2O3 (Fe–O) contained in mineral crystals. Furthermore, there is less adsorption of Fe3+ on the surface of epidote, and this discrepancy leads to the difference in the adsorption of NaOL on the minerals’ surface, which itself leads to the difference in flotation behavior between feldspar and epidote. These findings indicate that the flotation separation of feldspar and epidote can be achieved using Fe3+ and NaOL under natural pH. This study may provide a reference for the flotation mechanism of feldspar and epidote under natural pH.

Adsorption Mechanism of Sodium Oleate at Hematite/quartz–water Interfaces: A Quantitative Molecular Insight

Quantitative analysis of surface adsorption reactivity during flotation process by surface complexation model: diaspore and kaolinite

Insights into the influence of calcium ions on the adsorption behavior of sodium oleate and its response to flotation of quartz: FT-IR, XPS and AMF studies

Surface complexation model theory application in NaOL and CTAB collector adsorption differences of diaspore and kaolinite flotation

Particle aggregation characteristics of hematite-quartz mixture with addition of sodium oleate

Molecular dynamics study on selective flotation of hematite with sodium oleate collector and starch-acrylamide flocculant

Effects of Interfacial Hydroxylation Microstructure on Quartz Flotation by Sodium Oleate

New insight into surface adsorption thermodynamic, kinetic properties and adsorption mechanisms of sodium oleate on ilmenite and titanaugite

Quantization of the hydration and dodecylamine adsorption characteristics of hematite and quartz surface active sites to forecast the flotation behavior of minerals

Elucidating the enhancement of kaolinite flotation by iron content through density functional theory: A study on sodium oleate adsorption efficiency

Selective separation mechanism of hematite from quartz by anionic reverse flotation: Implications from surface hydroxylation

Differential adsorption of a high-performance collector at solid–liquid interface for the selective flotation of hematite from quartz

Adsorption Mechanism of New Mixed Anionic/cationic Collectors in a Spodumene-Feldspar Flotation System

Enhanced Flotation Separation of Iron and Silicon with Branched Block Polyethylene Oxide Polypropylene Oxide and Sodium Oleate: Mechanisms and Flotation Behavior

Effects and Mechanism of Fe3+ on Flotation Separation of Feldspar and Epidote with Sodium Oleate at Natural pH

Nanomechanical insights into hydrophobic interactions of mineral surfaces in interfacial adsorption, aggregation and flotation processes

Effects of the Goethite Surface Hydration Microstructure on the Adsorption of the Collectors Dodecylamine and Sodium Oleate

Computational Simulations of Adsorption Behavior of Anionic Surfactants at the Portlandite-Water Interface under Sulfate and Calcium Ions

Adsorption mechanisms of activated surface of quartz and feldspar with mixed NaOL/DDA

Molecular dynamics simulations of adsorption behavior of DDAH, NaOL and mixed DDAH/NaOL surfactants on muscovite (001) surface in aqueous solution

Novel insights into the role of colloidal calcium dioleate in the flotation of calcium minerals