Abstract:The mechanical properties of shale are generally influenced by in situ geological conditions. However, the understanding of the effects of in situ geological conditions on the mechanical properties of shale is still immature. To address this problem, this paper provides insight into the elasticity and characteristic stress thresholds (i.e., the crack closure stress σcc, crack initiation stress σci, and crack damage stress σcd) of shales with differently oriented bedding planes under deep in situ geological conditions. To accurately determine the elastic parameters and crack closure and initiation thresholds, a new method-i.e., the bidirectional iterative approximation (BIA) method-which iteratively approaches the upper and lower limit stresses of the linear elastic stress-strain regime, was proposed. Several triaxial compression experiments were performed on Longmaxi shale samples under coupled in situ stress and temperature conditions reflecting depths of 2000 and 4000 m in the study area. The results showed that the peak deviatoric stress (σp) of shale samples with the same bedding plane orientation increases as depth increases from 2000 m to 4000 m. In addition, the elastic modulus of the shale studied is more influenced by bedding plane orientation than by burial depth. However, the Poisson's ratios of the studied shale samples are very similar, indicating that for the studied depth conditions, the Poisson's ratio is not influenced by the geological conditions and bedding plane orientation. For the shale samples with the two typical bedding plane orientations tested (i.e., perpendicular and parallel to the axial loading direction) under 2000 and 4000 m geological conditions, the ratio of crack closure stress to peak deviatoric stress (σcc/σp) ranges from 24.83% to 25.16%, and the ratio of crack initiation stress to peak deviatoric stress (σci/σp) ranges from 34.78% to 38.23%, indicating that the σcc/σp and σci/σp ratios do not change much, and are less affected by the bedding plane orientation and depth conditions studied. Furthermore, as the in situ depth increases from 2000 m to 4000 m, the increase in σcd is significantly greater than that of σcc and σci, indicating that σcd is more sensitive to changes in depth, and that the increase in depth has an obvious inhibitory effect on crack extension. The expected experimental results will provide the background for further constitutive modeling and numerical analysis of the shale gas reservoirs.

Correlations Between Microscale Dimensions and Elastic Anisotropy in Shale

Multiscale Elastic Anisotropy of a Shale Characterized by Cross-Scale Big Data Nanoindentation

Anisotropic microscale failure mechanism of shale

Nanoscale mechanical property variations concerning mineral composition and contact of marine shale

Mechanical Behaviors of an Anisotropic Shale Rock

Investigation of Mechanical Properties of Quartz and Illite in Shale Using Molecular Dynamics Simulation

Anisotropic Mechanical Behaviors of Shale Rock and Their Relation to Hydraulic Fracturing in a Shale Reservoir: A Review

Nano-scale mechanical properties of constituent minerals in shales investigated by combined nanoindentation statistical analyses and SEM-EDS-XRD techniques

Experimental research on anisotropic properties of shale

Rock Physics Modeling Studies on the Elastic and Anisotropic Properties of Organic-Rich Shale

Anisotropic Mechanism and Characteristics of Deformation and Failure of Longmaxi Shale

Research on the mechanical behaviour of shale based on multiscale analysis.

Experimental study on anisotropic properties of Longmaxi formation shale under uniaxial compression

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Experimental Study of Direct Shear Properties of Anisotropic Reservoir Shale

Anisotropy Characterization of the Elasticity and Energy Flow of Longmaxi Shale under Uniaxial Compression

Effect of Microstructure Heterogeneity on Shale Strength: Insights from Micro-CT Imaging and Numerical Simulations

Anisotropic Characteristics of Crack Initiation and Crack Damage Thresholds for Shale

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

Estimation of the equivalent elastic modulus in shale formation: Theoretical model and experiment

Anisotropic Strength and Failure Behaviors of Transversely Isotropic Shales: an Experimental Investigation