Abstract:Perovskite passivation has been vital for obtaining highly efficient and stable perovskite solar cells (PSCs). Phenylethylammnonium (PEA)-based passivator is one of the most major categories as it is effective in improving PSC performances taking advantages of its large absorption energy over perovskite surface. However, this conventional passivator suffers from thermal stability issues; under thermal stress even at moderate temperature (e.g., 50℃) for several minutes, the overlayer of the perovskite passivated with PEA iodide salt (PEAI) transforms to a two-dimensional perovskite of (PEA)2PbI4, which hampers carrier transfer, thus negating the passivation effects and/or degrading the photovoltaic (PV) performances. Herein, we propose a novel yet simple strategy to address the thermal stability issue using a newly synthesized PEA bis(trifluoromethylsulfonyl)imide (PEA-TFSI) additive for poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA) hole transport materials (HTMs). Upon the deposition of the PTAA HTM solution with a PEA-TFSI additive over the perovskite layers, the PEA cations spontaneously passivated the perovskite, forming a monolayer-like passivation overlayer. The resulting PEA-based passivation did not cause crystallization at the elevated temperature of 85℃; hence, it did not cause PV performance drop due to the thermal stress and retained a higher PV performance compared to the samples with the conventional Li-TFSI additive for over 800 h. Besides, compared to PSCs with Li-TFSI, PSCs with PEA-TFSI exhibited an improvement in stability under humid conditions (30℃, 50% relative humidity) for over 600 h, taking advantage of the resulting hydrophobicity. The optimal PEA-TFSI additive enhanced the PV performance, reaching a power conversion efficiency of up to 22.1% (21.2% in the quasi-steady state). These values are relatively high in the PTAA-based PSCs with an n-i-p structure particularly without using lithium species, which is considered to be detrimental for PSCs. These high PV performances were most likely attributed to improved affinity at the interface between PTAA and the perovskite, which is hardly attainable by an aliphatic ammonium passivator, and the PEA passivation effects. These results provide novel insights into the commonly used PEA-based perovskite passivation particularly in combining thermally stable PTAA HTMs and the promising alkylammonium spontaneous passivators, which spurs the further development of PSCs.

Effects of PEAI Post-treatments on the Ion Migration in Lead Iodide Perovskites

Bilateral Interface Engineering for Efficient and Stable Perovskite Solar Cells Using Phenylethylammonium Iodide

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

High-Performance Perovskite Solar Cells with Low Open-Circuit Voltage Loss and Excellent Stability after p-F-PEAI Posttreatment

Brominated PEAI as Multi‐Functional Passivator for High‐Efficiency Perovskite Solar Cell

Interface and Grain Boundary Passivation by PEA-SCN Double Ions via One-Step Crystal Engineering for All Air-Processed, Stable Perovskite Solar Cells

Thermally Stable Phenylethylammonium-based Perovskite Passivation: Spontaneous Passivation with Phenylethylammonium Bis(trifluoromethylsulfonyl)imide under Deposition of PTAA for Enhancing Photovoltaic Performances of Perovskite Solar Cells

A comparative study of surface passivation of p-i-n perovskite solar cells by phenethylammonium iodide and 4-fluorophenethylammonium iodide for efficient and practical perovskite solar cells with long-term reliability

Single‐step post‐production treatment of lead acetate precursor‐based perovskite using alkylamine salts for reduced grain‐boundary related film defects

Peptide‐Based Ammonium Halide with Inhibited Deprotonation Enabling Effective Interfacial Engineering for Highly Efficient and Stable FAPbI3 Perovskite Solar Cells

High performance and stability of perovskite solar cells achieved through anti-solvent modulation of multi-orientation PbI 2 and stress relief

Reexamining the Post‐Treatment Effects on Perovskite Solar Cells: Passivation and Chloride Redistribution

Effects of passivated molecular side group on inverted inorganic CsPbI2Br perovskite solar cells

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Enhancing the Efficiency and Stability of Triple-Cation Perovskite Solar Cells by Eliminating Excess PbI2 from the Perovskite/Hole Transport Layer Interface

2D PEA 2 PbI 4 –3D MAPbI 3 Composite Perovskite Interfacial Layer for Highly Efficient and Stable Mixed-Ion Perovskite Solar Cells

Hybrid 2D/3D Perovskite Film with Enhanced Crystallinity via PEAI Passivation in Perovskite Solar Cells

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

4-Methoxy phenethylammonium halide salts for surface passivation of perovskite films towards efficient and stable solar cells

Dimensionality-Controlled Surface Passivation for Enhancing Performance and Stability of Perovskite Solar Cells via Triethylenetetramine Vapor

Phenylethylammonium iodide induced “ in situ healing” behavior for carbon-electrode basing, hole-conductor-free perovskite solar cells