High Specific Activity during Electrochemical CO2 Reduction through Homogeneous Deposition of Gold Nanoparticles on Gas Diffusion Electrodes

Kazuyuki Iwase,Takuya Yamada,Naoto Todoroki,Itaru Honma

DOI: https://doi.org/10.26434/chemrxiv-2024-ns1l4

2024-08-13

Abstract:The electrochemical CO2 reduction reaction (CO2RR) has attracted attention as a promising strategy for converting CO2 into value-added products. Gas diffusion electrodes (GDEs) loaded with metallic nanoparticles as electrocatalysts are expected to efficiently reduce CO2 due to the high specific surface area of such particles and the superior mass transport characteristics of GDEs. In the present study, GDEs loaded with homogeneous layers of sub-nanometer gold (Au) nanoparticles were fabricated using a radio frequency sputtering technique that had a low deposition rate. This allowed precise control of the catalyst loading. The Au-loaded GDEs exhibited significantly higher CO production efficiency compared with the electrodes fabricated by conventional deposition methods using dispersed Au nanoparticles. Additionally, a Au-loaded GDE having a catalytic layer thickness of 10 nm demonstrated a mass-based CO production activity of 1882 A g-¹ at -0.85 V. This is the highest value yet reported. This work confirmed that the uniform deposition of sub-nanometer metallic particles gives enhanced catalyst utilization. The results of this research provide important insights into the design of efficient CO2RR electrodes and highlight the potential of radio frequency sputtering to fabricate high-performance CO2RR electrodes as an approach to realizing carbon-neutral technologies.

Chemistry

What problem does this paper attempt to address?

The paper is primarily dedicated to addressing the issue of catalyst efficiency in the electrochemical carbon dioxide reduction reaction (CO₂RR), specifically by improving the selectivity and activity of CO products through the preparation of gas diffusion electrodes (GDEs) with a uniformly deposited layer of gold nanoparticles. Specifically, the research team used radio frequency sputtering technology to deposit sub-nanometer gold (Au) nanoparticles on gas diffusion electrodes to achieve precise control over the catalyst loading. This method significantly improves CO production efficiency compared to traditional deposition methods, and the Au-loaded GDEs prepared in the experiment exhibited a mass-based CO production activity of up to 1882 A g⁻¹ at -0.85 V, the highest value reported to date. Furthermore, the paper emphasizes that uniformly deposited sub-nanometer metal particles can enhance catalyst utilization, which is significant for designing efficient CO₂RR electrodes and manufacturing high-performance CO₂RR electrodes using radio frequency sputtering technology. This contributes to the goal of achieving carbon neutrality. Through this work, the researchers provide important insights into how to effectively utilize CO₂ and demonstrate the potential of radio frequency sputtering as a method to improve CO₂RR performance.

High Specific Activity during Electrochemical CO2 Reduction through Homogeneous Deposition of Gold Nanoparticles on Gas Diffusion Electrodes

A Gold–Palladium Nanoparticle Alloy Catalyst for CO Production from CO2 Electroreduction

Rational Design and Synergistic Effect of Ultrafine Ag Nanodots Decorated Fish-Scale-like Zn Nanoleaves for Highly Selective Electrochemical CO2 Reduction

Probing the Catalytically Active Region in a Nanoporous Gold Gas Diffusion Electrode for Highly Selective Carbon Dioxide Reduction

Self-supported copper-based gas diffusion electrodes for CO2 electrochemical reduction

Electrochemical Fabrication and Reactivation of Nanoporous Gold with Abundant Surface Steps for CO 2 Reduction

Efficient carbon dioxide electroreduction over rationally designed heterogeneous Ag2S-Au nanocomposites

Low-loading gold in situ doped with sulfur by biomolecule-assisted approach for promoted electrochemical carbon dioxide reduction

Promoting CO2 Electroreduction to CO by a Graphdiyne-Stabilized Au Nanoparticle Catalyst.

(Invited) Nanotip-Defined High Local Electric Fields Accelerate CO2 Reduction Heterogeneous Catalysts

Ultrahigh Mass Activity for Carbon Dioxide Reduction Enabled by Gold-Iron Core-Shell Nanoparticles.

Robust Catalysis of Hierarchically Nanoporous Gold for CO2 Electrochemical Reduction

Engineering hydrophobicity and high-index planes of gold nanostructures for highly selective electrochemical CO 2 reduction to CO and efficient CO 2 capture

Electrochemical CO2-to-CO Via Enriched Oxygen Vacancies at Gold/ceria Interfaces

Electrochemical Fabrication and Reactivation of Nanoporous Gold with Abundant Surface Steps for CO2 Reduction

High-Density Nanosharp Microstructures Enable Efficient CO2 Electroreduction

(Digital Presentation) Highly Efficient and Selective CO2 Electroreduction to CO on Novel Metal-Nitrogen-Carbon (M-N-C) Catalyst

Elucidating Mass Transport within Nanoporous Au for CO2 Electroreduction

Interfacing Dense NiFe@N-Doped Carbon Nanotubes on a Ni Hollow Fiber As a High-Current-Density Gas-Penetrable Electrode for Selective CO2 Electroreduction

An Integrated Carbonized Wood-Based Gas-Diffusion Electrode for High-Current-density CO Electrosynthesis in Flow Cells

Graphdiyne‐Stabilized Silver Nanoparticles As an Efficient Electrocatalyst for CO2 Reduction