Abstract:The high processing cost, poor mechanical properties and moderate performance of Bi2Te3–based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce Bi2Te3-Cu2-xTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure Bi2Te3 nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of Cu2-xTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference Bi2Te3 nanomaterial, which is already very low. However, the introduction of Cu2-xTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that Cu2-xTe nanostructures, with a relatively low electron affinity, are able to inject electrons into Bi2Te3, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within Bi2Te3 domains associated with the accumulation of electrons in regions nearby a Cu2-xTe/Bi2Te3 heterojunction. Overall, with the incorporation of a proper amount of Cu2-xTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of Bi2Te3.

Nanocomposite Strategy Toward Enhanced Thermoelectric Performance in Bismuth Telluride

Enhanced Thermoelectric Performance of Solution-Derived Bismuth Telluride Based Nanocomposites Via Liquid-Phase Sintering

Bismuth Telluride Nanotubes and the Effects on the Thermoelectric Properties of Nanotube-Containing Nanocomposites

Enhanced Thermoelectric Performance of PbTe Nanocomposites with Ag Nanoinclusions

Enhancing the Thermoelectric Property of Bi2Te3 Through a Facile Design of Interfacial Phonon Scattering

Significant enhancement in the thermoelectric performance of a bismuth telluride nanocompound through brief fabrication procedures

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

Bismuth telluride nanostructures: preparation, thermoelectric properties and topological insulating effect

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Enhanced thermoelectric properties for p -type BiSbTe by incorporating multiferroic BiFeO 3 nanoparticles

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Enhancement of Thermoelectric Figure of Merit for Bi 0.5 Sb 1.5 Te 3 by Metal Nanoparticle Decoration

Tailoring interfacial states for improved n-type bismuth telluride thermoelectrics

Synergistic Improvement of BiI3 and In on Thermoelectric Properties of Zone-Melted n-Type Bi2Te2.7Se0.3

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi 0.48 Sb 1.52 Te 3 –AgSbSe 2 Composite

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

Strategy for enhanced thermoelectric performance of Bi2S3 nanorods by Bi nanoinclusions